Mitsubishi Electric HC6000 User Manual page 28

Menu operation (continued)
3. FEATURE menu
opt.
FE A TURE A V MEMO R Y 1
ASPECT
PASSWORD DISPLAY
INPUT
FUNCTION
MENU POSITION 1.
MENU DIMMER
CINEMA MODE
?
VIDEO SIGNAL
SETUP
SCART INPUT
A
LANGUAGE English
Ë
RESET ALL
3. FEATURE menu
ITEM SETTING
ASPECT AUTO
ZOOM1
ZOOM2
STRETCH
PASSWORD FUNCTION
MENU POSITION 2 options
MENU DIMMER ON / OFF
CINEMA MODE AUTO
VIDEO
FILM
VIDEO SIGNAL 8 options
SETUP AUTO
3.75% / 7.5%
SCART INPUT ON / OFF
LANGUAGE 10 languages
OK
RESET ALL
• When SCREEN SIZE of ADVANCED MENU is set to CINEMA SCOPE(2.35:1) in the IMAGE menu, STRETCH
cannot be selected for ASPECT.
• When SCART INPUT is set to ON, normal computer signals aren't projected.
• Use a SCART-BNC (or SCART-Mini D-SUB 15-pin) cable (option) when connecting this projector with an AV device
equipped with the SCART terminal.
• Some AV devices equipped with the SCART terminal aren't compatible with this projector.
• It may take a little while to carry out RESET ALL in the FEATURE menu.
AUTO
OFF
AUTO
AUTO
AUTO
OFF
OK
FUNCTION
Select to change the aspect ratio automatically depending on the input signal.
4:3 Select to project images with an aspect ratio of 4:3.
16:9 Select to project images with an aspect ratio of 16:9. (Linearly stretched.)
Select to enlarge and project images of CinemaScope size.
Select to enlarge and project images of Vista size.
Select to enlarge to 16:9 and project of the images with an aspect ratio of 4:3.
(Non-linearly stretched.)
Use to enable or cancel the password lock. See page 35 for details.
Use to change the position of the menu.
Use to reduce the brightness of the menu.
The fi lm mode will be automatically activated when a fi lm source signal is input.
Select AUTO for normal use.
When fl icker occurs on the screen or jaggies on slanting lines are remarkable,
select FILM when a fi lm source signal is input or select VIDEO for other signals.
The fi lm mode will not be activated.
Fixed to the fi lm mode.
When AUTO is selected, the appropriate video format is automatically selected
depending on the input signal. If the image isn't displayed correctly, select the
desired video format manually.
Select AUTO for normal use. When LANGUAGE is not set to
480p or TV60 signal is input, the SETUP changes to 7.5% automatically.
OFF Select to make black lighter.
Select to make black intense.
• When 7.5% is chosen, the brightness is decreased by the set-up cancel
function for the U.S. Choose OFF when the image is dark.
Choose ON when connecting the projector with a device equipped with the
SCART terminal that can output RGB signal. SCART terminal is used mainly
in Europe. Choose OFF normally. (Available only for the input signal from the
COMPUTER IN/COMPONENT VIDEO IN terminal.)
Use to select the language used in the menus.
Use to reset the settings of the menu (excluding PASSWORD FUNCTION and
LANGUAGE) to the factory setting values.
EN-28
and 480i,