Table of Contents
Advertisement
Connecting a TV
The S-Video connector of your computer allows you to use a TV to display the
computer images for your specific purpose, such as enjoying your DVD movies.
To connect a TV, you will need the S-Video cable (not included). Then, you
can configure the display settings as described in the section Using the
Video Function of Chapter 2.
Connecting USB Devices
The USB 2.0 ports of your computer allow you to connect many peripheral
devices, such as the mouse, keyboard, speakers, modem, external hard
disk module, printer, and more. The USB-standard interface supports "plug-
and-play" technology, so that you can connect and remove the USB devices
without turning off the computer.
To connect the USB device, simply connect the cable of the device to the USB
port of your computer.
Connecting an External Monitor
You can connect an external monitor to your computer through the VGA port
for a larger view with higher resolution. To connect the monitor:
1.
Confirm that the computer is turned off.
2.
Plug the monitor's D-type connector into the computer's VGA port.
3.
Connect the monitor's power cord, and then turn on the monitor.
4.
Turn on the computer, and the monitor should respond by default.
If not, you can switch the display mode by pressing [Fn]+[F2].
Alternately, you can change the display mode by configuring the
settings in Display Properties of W indows operating system.
6 - 3
Advertisement
Table of Contents
