MSI Wind Top AE2020 Software Manual

All-in-one (aio) pc

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Wind Top AE2020

All-in-One (AIO) PC

MS-AA1511 (V1.X) System

G52-AA151X1

Table of Contents

Summary of Contents for MSI Wind Top AE2020

Page 1 Wind Top AE2020 All-in-One (AIO) PC MS-AA1511 (V1.X) System G52-AA151X1...
Page 2: Table Of Contents
▍ Preface table of contents ▍ copyright notice ��iii trademarks ��iii U�s� Patent numbers��iii Revision History��iii Upgrade and Warranty ��iv acquisition of Replaceable Parts ��iv technical support��iv fcc-b Radio frequency Interference statement��v safety Instructions ��vi Weee statement�� viii 1� overview�� 1-1 Packing contents ��...
Page 3: Copyright Notice
MS-AA1511 copyright notice the material in this document is the intellectual property of MIcRo-StAR InteRnA- tIonAl. We take every care in the preparation of this document, but no guarantee is given as to the correctness of its contents. our products are under continual im- provement and we reserve the right to make changes without notice.
Page 4: Upgrade And Warranty
Alterna- tively, please try the following help resources for further guidance. ◙ Visit the MSI website for fAQ, technical guide, bIoS updates, driver updates and other information via http://www.msi.com/index.php?func=service ◙...
Page 5: Fcc-B Radio Frequency Interference Statement
MS-AA1511 fcc-b Radio frequency Interference Statement this equipment has been tested and found to comply with the limits for a class b digital device, pursuant to Part 15 of the fcc Rules. these limits are designed to provide reasonable protec- tion against harmful interference in a residential installation.
Page 6: Safety Instructions
▍ Preface Safety Instructions Read the safety instructions carefully and thoroughly. All cautions and warnings on the equipment or user’s manual should be noted. Keep the User’s Guide that comes with the package for future reference. Keep this equipment away from humidity and high temperature. lay this equipment on a reliable flat surface before setting it up.
Page 7 ◙ Visit the MSI website for further information via http://www.msi.com/index.php?func=html&name=service_worldwide. the optical storage devices are classified as clASS 1 lASeR PRoDUct. Use of controls or adjustments or performance of procedures other than those specified is prohibited.
Page 8: Weee Statement
▍ Preface Weee Statement (english) Under the european Union (“eU”) Directive on Waste electrical and electronic equip- ment, Directive 2002/96/ec, which takes effect on August 13, 2005, products of “electrical and electronic equipment” cannot be discarded as municipal waste anymore and manufacturers of covered electronic equipment will be obligated to take back such products at the end of their useful life.
Page 9 MS-AA1511 (Greek) (Ελληνικά) Σύμφωνα με την Οδηγία 2002/96/ΕΚ της Ευρωπαϊκής Ένωσης («ΕΕ») περί Απόρριψης Ηλεκτρικού και Ηλεκτρονικού Εξοπλισμού (Weee), η οποία λαμβάνει ισχύ στις 13 Αυγούστου 2005, τα προϊόντα «ηλεκτρικού και ηλεκτρονικού εξοπλισμού» δεν είναι δυνατόν να απορριφθούν πλέον ως κοινά απορρίμματα και οι κατασκευαστές κεκαλυμμένου ηλεκτρονικού εξοπλισμού...
Page 10 ▍ Preface (thai) (ไทย) ภายใต้ ข ้ อ กำหนดของสหภาพยุ โ รป (“eU”) เกี ่ ย วกั บ ของเสี ย จากอุ ป กรณ์ ไ ฟฟ้ า และอิ เ ล็ ก ทรอนิ ก ส์ เลขที ่ 2002/96/ec ซึ ่ ง มี ผ ลบั ง คั บ ใช้ ต ั ้ ง แต่ ว ั น ที ่ 13 สิ ง หาคม 2005 ผู ้ ใ ช้ ไ ม่ ส ามารถทิ ้ ง ผลิ ตภั...
Page 11 MS-AA1511 (Slovenian) (Slovenščina) Skladno z določili direktive evropske unije (“eU”) o odpadni električni in elektronski opremi, Direktiva 2002/96/eS, ki je veljavna od 13. avgusta, izdelkov “električne in elektronske opreme” ni dovoljeno odstranjevati kot običajne komunalne odpadke, proizvajalci zadevne elektronske opreme pa so zavezani, da tovrstne izdelke na koncu njihove življenjske dobe sprejmejo nazaj.
Page 13: 1� Overview
1 overview Wind top Ae2020 is integrated in design, selecting a stylish ap- pearance with a glassy frame, which displays the simplicity of modern individualism and the comfort of home. furthermore, it is accompanied with the best computer features, such as instant message, low acoustics, energy saving, and 802.11 b/g/n wire-...
Page 14: Packing Contents
▍ overview acking ontents Wind top Series Ac/Dc Adapter Ac Power cord User Manual & Driver/Utility Disk lcD Display Wiper Quick Guide Keyboard (optional) Mouse (optional) Stylus (optional) * Please contact us immediately if any of the items is damaged or missing. * the picture is for your reference only and your packing contents may slightly vary depending on the model you purchased.
Page 15: System Overview
MS-AA1511 ystem verview front View Microphone - the built-in microphone can be used for video chatting online. Webcam - the built-in webcam with the microphone can be used for picture tak- ing, video recoding, online conferencing and any other interactive ap- plications.
Page 16 ▍ overview Rear View Important We suggest that you connect the Ac/Dc adapter to your AIo Pc first and then con- nect the Ac power cord to the socket-outlet for safety concerns.
Page 17 MS-AA1511 Ventilator - The ventilator on the enclosure is used for air convection and to pre- vent the equipment from overheating. Do not cover the ventilator. Optical Disk Drive - A DVD Super-Multi drive is integrated for your home entertainment. (Blu-ray is optional.) Card Reader Drive - The built-in card reader may support various types of memory card,...
Page 18 ▍ overview e-SAtA Port (optional) the e-SAtA (external-SAtA) port is provided for e-SAtA hard disk drives. RJ-45 lAn Jack - the standard RJ-45 lAn jack is provided for connection to the local Area network (lAn). You can connect a network cable to it. Yellow Green/ orange color...
Page 19: Side View
MS-AA1511 Side View optical Disk Drive - A DVD Super-Multi drive is integrated for your home entertainment. (blu-ray is optional.) eject button - Press the eject button to open the optical disk drive. eject Hole - Insert a thin, straight object (such as a paper clip) into the eject hole to open the optical disk drive manually if the eject button does not work.
Page 20 ▍ overview USb Ports - the USb (Universal Serial bus) port is provided for attaching USb devices such as mouse, keyboard, printer, scanner, camera, PDA or other USb-compatible devices. Ventilator - the ventilator on the enclosure is used for air convection and to pre- vent the equipment from overheating.
Page 21: Mainboard Specifications
MS-AA1511 ainboard Pecifications Processor ■ Socket P for Intel Pentium Dual-core, celeron , core™2 Duo processors ® ® ® ■ front Side bus (fSb) up to 1066 MHz ■ thermal Design Power (tDP) 35 W chipset ■ nVIDIA Ion™ graphics processors ®...
Page 22: System Specifications
▍ overview ystem Pecifications Display ■ 20-inch tft lcD display with an optimal resolution of 1600 X 900 and standard proportion of 16:9 widescreen Rear Panel I/o ■ 1 Dc power jack ■ 1 VGA port (optional) ■ 4 USb ports ■...
Page 23 MS-AA1511 & U omPonent ePlacement Pgrade Please note that certain components preinstalled in the product may be up- gradable or replaceable by user’s request depending on the models users pur- chased. Memory 1-11...
Page 24 Wireless lAn card optical Disk Drive If the specified component has been determined by the MSI engineer or store as problematic or defective and may incur the need for replacement, you may bring the product for repair along with the warranty card, purchase invoice or receipt to the MSI-authorized service center closest to your location for as- sistance.
Page 25: Getting Started
chapter 2 Getting Started this chapter provides you with the information on hardware set- up procedures. While connecting peripheral devices, be careful in holding the devices and use a grounded wrist strap to avoid static electricity.
Page 26: Safety & Comfort Tips
▍ Getting Started & c afety omfort the AIo Pc is a portable platform that allows you to work anywhere. However, choosing a good workspace is important if you have to work with your Pc for a long period of time. ■...
Page 27: Having Good Working Habits
MS-AA1511 aving orking abits Having good working habits is important if you have to work with your AIo Pc for long periods of time; otherwise, it may cause discomfort or injury to you. Please keep the following tips in mind when operating. ■...
Page 28: Knowing The Keyboard (Optional)
Soft-touch and tactile feedback for comfortable typing ■ new concept elegant and slim keyboard in streamline shape ■ compact size for space saving ■ especially fit for MSI lcD display ■ compatible with Windows 2000/ Me/ XP/ Vista/ 7 ® ■...
Page 29 MS-AA1511 ▶ Multimedia Keys fn + f7 backward to previous track fn + f8 Play and pause fn + f9 forward to next track fn + f10 Mute function fn + f11 Volume down fn + f12 Volume up ▶ Hot Keys fn + f1 launch the default e-Mail applications...
Page 30: Positioning Your System
▍ Getting Started ositioning yoUr ystem Positioning Your AIo Pc Step 1. Place your AIo Pc on a flat and steady surface such as a table or desk. Step 2. Pull the stand open and tilt the lcD display to an angle of between 10 and 20 degrees to suit your preference.
Page 31: Connecting Peripheral Devices
MS-AA1511 onnecting eriPHeral evices the I/o (input/output) ports on the rear panel allow you to connect peripheral devices. All devices listed here are for reference only. connecting the USb Devices this AIo Pc provides USb ports for connecting various USb devices, such as mouse, keyboard, digital camera, webcam, printer, external optical storage de- vice,..
Page 32 ▍ Getting Started Connecting VGA & HDMI Devices (Optional) This AIO PC provides a VGA port and an HDMI port for connection to external moni- tors, projectors, set-top boxes, DVD players, digital video cameras, mini notebooks, digital cameras, etc. VGA (Video Graphics Array) is a graphics display system for PCs. VGA connectors and their associated cabling are always used solely to carry analog video signals along with digital clock and data.
Page 33 MS-AA1511 connecting the external SAtA Hard Disk Drive (optional) the e-SAtA connector allows you to connect an external Serial AtA hard disk device. the e-SAtA standard interface supports “plug-and-play” technology, so that you can connect and remove the e-SAtA devices without turning off the AIo Pc.
Page 34 ▍ Getting Started connecting the communication Device Wired lAn  the RJ-45 connector of the AIo Pc allows you to connect the lAn (local area network) devices, such as a hub, switch and gateway, to build a network con- nection. for more instructions or detailed steps on connecting to the lAn, please ask your MIS staff or network manager for help.
Page 35 MS-AA1511 Wireless lAn (optional)  this AIo Pc is equipped with wireless lAn module which allows users to per- form fast data transmission with standard Ieee 802.11 technology for wireless lAn. this gives users the mobility to move around within a broad coverage area and still be connected to the network.
Page 36: Connecting Power
▍ Getting Started onnecting ower connecting the Ac Power Step 1. Unpack the package to find the Ac/Dc adapter and Ac power cord. Step 2. Assemble the Ac/Dc adapter and the Ac power cord. Step 3. Plug the Dc end of the adapter to the AIo Pc, and the male end of the Ac power cord to the electrical outlet.
Page 37: 3� System Operations
chapter 3 System operations this chapter provides you with essential information on system operations, such as system boot setup, recovery disk creation, network connection, SRS Premium Sound, and so on. Important • It is highly recommended that you create a system recovery disk as the backup solution in the event of a catastrophic disk failure or other accidents.
Page 38: System Booting Setup For The First Time
▍ System operations ystem ooting etUP for tHe first time for the first-time use, you will need to go over the following steps to start using your Wind top Series AIo Pc. the entire booting setup will take you around 30 minutes.
Page 39: Creating System Recovery Disk
MS-AA1511 reating ystem ecovery for the first-time use, it is highly recommended that you create a system recovery disk as the backup solution in the event of a catastrophic disk failure or other ac- cidents. before moving forward, please make sure your system booting setup is complete and go over the following procedures to get it done.
Page 40 ▍ System operations Step 3. Select [create and burn a recovery disk] and click [next] to continue. Alternatively, choose [Advanced] to bring forth advanced options. choose between the provided options and click [next] to continue.
Page 41 MS-AA1511 Step 4. the progress bar starts running to create the image of recovery disk. It takes some time to finish the processing. Step 5. follow the on-screen instructions to prepare enough number of blank DVD disks. Insert the blank DVD disk into the optical disk drive and click [next] to continue.
Page 42 ▍ System operations Step 6. the Windows Disc Image burner pops up. click [burn] to start the burn- ing progress. It takes a while to finish the processing.
Page 43 MS-AA1511 Step 7. on completion of the disk creation, click [close] to exit and take out the disk. follow the on-screen instructions to create all recovery disks. Step 8. All recovery disks have been successfully created. Please store the disks carefully and click [next] to continue.
Page 44 ▍ System operations Step 9. check the following box if you want to remove the temporary files. click [finish] to complete recovery disk creation.
Page 45 MS-AA1511 oUcH anel alibration Ptional for ingle oUcH Wind top Series AIo Pc has touch panel function. If the mouse cursor can not match the move, users could use the Ideacom tSc tool installed in system to adjust the accuracy of the touch panel. Please go over the following steps to get it done.
Page 46 ▍ System operations Step 3. for advanced settings, click [Ideacom tSc] to launch the setup utility. three calibration modes are provided: 4 points, 9 points, and 25 points. We suggest that users choose 9 points to adjust the touch panel. If users desire the best precision, then choose 25 points instead.
Page 47: Network Connection Under Windows
MS-AA1511 etwork onnection Under indows Wired lAn  Step 1. Go to [Start] > [control Panel]. Step 2. Select [connect to the Internet] under [network and Internet]. 3-11...
Page 48 ▍ System operations Step 3. Select [broadband (PPPoe)] to connect using DSl or cable that requires a user name and password. Step 4. type the information from your Internet Service Provider (ISP) and click [connect] to establish your lAn connection. 3-12...
Page 49: Wireless Lan
MS-AA1511 Wireless lAn  Step 1. Go to [Start] > [control Panel]. Step 2. Select [connect to the Internet] under [network and Internet]. 3-13...
Page 50 ▍ System operations Step 3. Select [Wireless] to connect using a wireless router or a wireless net- work. Step 4. A list of available WlAn connections pops up. choose a connection from the list or click [open network and Sharing center] to establish a new connection.
Page 51 MS-AA1511 Step 6. followingly, choose [Manually connect to a wireless network] and click [next] to continue. Step 7. enter information for the wireless network you intend to add and click [next] to proceed. Step 8. A new WlAn connection has been made. click [close] to exit or select [change connection settings] to modify the WlAn settings.
Page 52: Ralink Wireless Lan Connection (Optional)
▍ System operations ralink w lan c ireless onnection Ptional Step 1. Right-click the Ralink Wireless lAn card status icon in the lower right corner, and then click launch config Utility. Step 2. the window displays some available wireless networks. choose a net- work, and then click connect.
Page 53 MS-AA1511 Step 3. there may prompt you to enter a key. type the network key and then click oK. Step 4. now, you’re ready to browse the Web wirelessly. 3-17...
Page 54: Srs Premium Sound (Optional)
▍ System operations srs P remiUm oUnd Ptional SRS Premium Sound is a comprehensive suite of state-of-the-art audio technologies that deliver a superior entertainment experi- ence for playback of music, video and game content on the Pc. With SRS Premium Sound your audio entertainment experience will sound better - more natural and immersive, with deeper bass, clearer dialog and outstanding surround sound.
Page 55 MS-AA1511 Step 3. choose the audio content you are listening to. the SRS Premium Sound will automatically process the specified audio signals to deliver enhanced audio performance. Step 4. the following settings allow for specific control of SRS tuning parameters and are provided for external Speakers and Headphones.
Page 56: On-Screen Display (Osd)
▍ System operations (osd) creen isPlay the on-screen display (oSD) allows you to tune the viewing options of the moni- tor, such as brightness, contrast, positioning, and language. It can be activated by buttons at the right side of the monitor. Step 1.
Page 57 MS-AA1511 Adjusting signal source Adjusting positioning & timeout Specifying language Resetting system Reading system information Adjusting wide screen mode 3-21...
Page 58 ▍ System operations Step 2. Press the Right & left arrow buttons to adjust the system volume. Step 3. Press the AUto button to view the video mode menu. Use the Right & left arrow buttons to select a desired mode and press the AUto button to exit after the selection is made.
Page 59: Power Management
MS-AA1511 ower anagement Power management of personal computers (Pcs) and monitors has the poten- tial to save significant amounts of electricity as well as deliver environmental benefits. to be energy efficient, turn off your display or set your Pc to sleep mode after a period of user inactivity.
Page 60 ▍ System operations ■ the Shut Down computer menu presents the options of Sleep (S3/S4) & Shut Down (S5) for rapid and easy management of your system power. Waking the System Up the computer shall be able to wake up from power saving mode in response to a command from any of the following: ■...
Page 61: System Recovery
Important The System Recovery Function is only available on systems bundled with Win- dows OS and MSI utilities by default. The purposes for using the System Recovery Function may include: ■ Restore the system back to the initial status of original manufacturer’s default settings.
Page 62 System operations 3. Select [Windows Setup] from the Windows boot Manager menu. 4. Select [MSI Recovery Manager] to start the System Recovery function; or select [eXIt] to restart the system. 5. the System Recovery function will get your system back to default settings.
Page 63 MS-AA1511 7. the System Recovery function is proceeding now. 8. the following message indicates successful system recovery. Press [oK] to restart the system and access the Windows operating system as usual. Recover the System with the Recovery Disks If the f3 hotkey recovery cannot work, try recovering your system with the recovery disks that you created beforehand.
Page 64 ▍ System operations 3. Select the [cD/DVD] device as the boot device and press [enter] to confirm the selection. Press any key to reconfirm the selection when the following message ap- pears. Press any key to boot from cD or DVD ... 4.
Page 65 MS-AA1511 [System Partition Recovery] will format the c drive only. only the c drive will be restored to manufacturer default. other drives will not be affected. It is highly recommended that users select [System Partition Recovery] to restore the system. 6.
Page 66 ▍ System operations 7. Do not turn off the system power while performing the system recovery function, or it may cause unknown damage to the system. 8. the following message indicates successful system recovery. Press [oK] to restart the system and access the Windows operating system as usual. 9.

This manual is also suitable for:

Ms-aa1511

MSI Wind Top AE2020 Software Manual

Quick Links

Related Manuals for MSI Wind Top AE2020

Summary of Contents for MSI Wind Top AE2020

This manual is also suitable for:

Table of Contents