Table of Contents
Advertisement
4-Port SSL/IPSec VPN Router
Setup Tab - MAC Clone
Some ISPs require that you register a MAC address, which is a 12-digit code assigned to a unique piece of
hardware for identification. The MAC Clone feature "clones" your network adapter's MAC address onto the
Router, so you don't have to call your ISP to change the registered MAC address to the Router's MAC address.
For the WAN port, you can assign or clone a MAC address.
MAC Clone
User Defined WAN MAC Address. To manually clone a MAC address, select User Defined WAN MAC Address,
Figure 5-26: Setup Tab - MAC Clone
and then enter the 12 digits of your adapter's MAC address.
MAC Address from this PC. To clone the MAC address of the PC you are currently using to configure the Router,
then select MAC Address from this PC.
Click the Save Settings button to save your changes, or click the Cancel Changes button to undo your changes.
Chapter 5: Setting Up and Configuring the Router
30
Setup Tab - MAC Clone
Advertisement
Table of Contents
Troubleshooting
