Table 18. Removal steps of LCD assembly (continued)
When installing:
• Make sure that you attach the connectors firmly.
• Make sure that you route the cables correctly and you tape up the cables in the proper positions as shown in
the following figure.
• When you route the cables, make sure that they are not subjected to any tension. Tension could cause the cables
to be damaged by the cable guides, or a wire to be broken.
1110 Base cover assembly and speaker assembly
For access, remove these FRUs in order:
•
"1010 Battery pack" on page 63
• "1020 Hard disk drive (HDD) and solid state drive (SSD)" on page 63
•
"1030 DIMM" on page 65
•
"1040 Keyboard" on page 67
•
"1050 Palm rest or palm rest with a fingerprint reader" on page 69
•
"1070 Backup battery" on page 73
• "1060 PCI Express Mini Card for wireless LAN/WiMAX" on page 71
•
"1080 PCI Express Mini Card for wireless WAN" on page 74
•
"1090 Keyboard bezel" on page 76
•
"1100 LCD assembly" on page 77
Table 19. Removal steps of speaker assembly
Remove the speaker assembly from the base cover assembly.
80
ThinkPad X220 and X220i Hardware Maintenance Manual