Main Menu Of The Webbios Utility; Creating A Storage Configuration Using The Configuration Wizard - Lenovo ThinkServer TS200 Installation And User Manual

1. After you turn on the power and when the computer is starting, you are
2. Select an adapter from the list.
3. Click Start. The main WebBIOS utility interface is displayed. You can toggle

Main menu of the WebBIOS utility

The main menu includes the following options:
Adapter Properties
Scan Devices
Virtual Disks
Physical Drives
Configuration Wizard
Adapter Selection
Physical View or Logical View
Events
Exit

Creating a storage configuration using the Configuration Wizard

Follow these steps to start create a storage configuration:
1. Click Configuration Wizard to start the wizard.
2. Select a configuration option:
116
ThinkServer TS200 Types 6522, 6523, 6524, 6525, 6526, 6528, 6529, and 6530: Installation and User Guide
prompted to press Ctrl + H when the following message is displayed:
Copyright© LSI Logic Corporation
Press <Ctrl><H> for WebBIOS
between the physical view and logical view of the storage devices that are
connected to the controller. Click Physical View or Logical View on the menu
in the left pane to change the view.
From this view, you can display and modify the properties of the SAS
adapter that is currently selected.
From this view, you can re-scan the physical and virtual disks for any
changes in the drive status or physical configuration.
From this view, you can display and modify the virtual disk properties,
delete virtual disks, initialize disks, and perform other tasks.
From this view, you can view the physical drive properties, create hot spare
disks, and perform other tasks.
Select this to start the Configuration Wizard and create a new storage
configuration, clear a configuration, or add a new configuration.
From this view, you can select a different SAS adapter. Then, you can view
information about the adapter and the drives connected to it, or create a
new configuration for the adapter.
Select this to toggle between the Physical View and Logical View.
From this view, you can display the system events in the Event Information
page.
Select this to exit the WebBIOS utility and continue with the system boot.
Attention: If you select Clear Configuration or New Configuration, all
existing data in the configuration is deleted. Make a backup copy of any data
that you want to keep before selecting these options.
Clear Configuration
Clears the existing configuration.