Hdstb Setup - LG 60PC1D Owner's Manual

- This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if
you do receive Digital signals from a digital set-top box or other digital external device, refer to the figure
as shown below.
When connecting with a HDMI cable
SERVICE SERVICE
HDMI-DTV OUTPUT
• TV can receive the video and audio signal simultaneously using a HDMI cable.
• If the digital set-top box supports Auto HDMI function, output resolution of the digital set-top box will
be automatically set to 1280x720p.
• If the digital set-top box does not support Auto HDMI, you need to set the output resolution appro-
priately. To get the best picture quality, adjust the output resolution of the digital set-top box to
1280x720p.
RGB IN
(PC)
AUDIO IN REMOTE
(RGB/DVI)
CONTROL IN
When connecting with a Component cable
RS-232C IN
(CONTROL & SERVICE)
RGB IN
(PC)
RGB IN
REMOTE AUDIO IN
CONTROL IN (RGB/DVI)
RS-232C IN
(CONTROL & SERVICE)
RGB IN RGB IN
(PC) (PC)
AUDIO IN AUDIO IN REMOTE REMOTE
(RGB/DVI) (RGB/DVI)
CONTROL IN CONTROL IN
HDMI IN HDMI IN
2
1(DVI)
RS-232C IN RS-232C IN
(CONTROL & SER (CONTROL & SERVICE) VICE)
1
Digital Set-top Box
Digital Set-top Box
(R) AUDIO (L)
B R
2
1
VIDEO VIDEO AUDIO AUDIO
OPTICAL PTICAL
( MONO )
DIGIT DIGITAL AL AUDIO AUDIO
S-VIDEO S-VIDEO VIDEO VIDEO AUDIO AUDIO
OUT OUT
SERVICE
HDMI / DVI IN

HDSTB Setup

Connect the HDMI output of the digital set-top
1
box to the HDMI IN 1(DVI) or 2 jack on the set.
Select HDMI1/DVI or HDMI2 input source with
2
using the INPUT button on the remote control.
Turn on the digital set-top box. (Refer to the
3
owner's manual for the digital set-top box.)
Connect the video outputs (Y, P
1
tal set-top box to the COMPONENT IN VIDEO
jacks on the set.
Connect the audio output of the digital set-top box
2
to the COMPONENT IN AUDIO jacks on the set.
Turn on the digital set-top box. (Refer to the
3
owner's manual for the digital set-top box.)
Select Component 1 input source with using the
4
INPUT button on the remote control.
- If connected to COMPONENT IN 2, select
Component 2 input source.
Signal
480i
480p/720p/1080i
RGB IN
(PC)
AUDIO IN REMOTE
(RGB/DVI)
CONTROL IN
, P ) of the digi-
B R
SERVICE
RGB IN
(PC)
AUDIO IN REMOTE
(RGB/DVI)
CONTROL IN
HDMI / DVI IN
RS-232C IN
(CONTROL & SERVICE)
Component1/2 HDMI1/DVI, HDMI2
Yes
Yes
Installation
No
Yes
23