Advertisement
Quick Links
Accessories included:
•
Screws (16 pcs)
10-32 x 5/8"
Hex drive
•
Nylon Washers (16 pcs)
•
Nylock Nuts (8 pcs)
10-32 thread insert size
•
Tinnerman Clips (8 pcs)
10-32 thread insert size
RKM-572 Holder
Instruction Manual
Tools required:
www.datavideo.us
•
Crescent wrench or 3/8 wrench
•
1/8 Hex Key (1 pc) (included)
Advertisement
Related Manuals for Datavideo Holder RKM-572
Summary of Contents for Datavideo Holder RKM-572
- Page 1 Nylon Washers (16 pcs) • Nylock Nuts (8 pcs) 10-32 thread insert size • Tinnerman Clips (8 pcs) 10-32 thread insert size RKM-572 Holder Tools required: • Crescent wrench or 3/8 wrench • 1/8 Hex Key (1 pc) (included) www.datavideo.us...
- Page 2 Holder Assembly Step 1: Lay the base flat on a hard surface. Step 2: Place the side bar vertically on top of the base (outer placement). Step 3: Place the washer onto the screw, and insert the screw through all 8 bottom holes, securing the screws with nylock nuts.