5 When not in use - Unplug the AC power cord from the AC
power plug if the unit will not be used for several months or
more. When the cord is plugged in, a small amount of current
continues to flow to the unit, even when the power is turned
off.
Outdoor Antenna
1
Power lines - When connecting an outdoor antenna, make
sure it is located away from power lines.
2 Outdoor antenna grounding - Be sure the antenna system
is properly grounded to provide protection against unexpected
voltage surges or static electricity build-up. Article 810 of the
National Electrical Code, ANS1/NFPA70, provides information
on proper grounding of the mast, supporting structure, and
the lead-in wire to the antenna discharge unit, as well as the
size of the grounding unit, connection to grounding terminals,
and requirements for grounding terminals themselves.
Antenna Grounding
According
to the National Electrical
Code
T
~
ANTENNA LEAD IN WIRE
ANTENNA DISCHARGE UNIT
(NEC SECTION 810-20)
I
ELECTRIC
I
/11
-?
ELECTRODE SYSTEM
(NEC ART 250 PART H)
NEC-NATIONAL
ELECTRICAL
CODE
Maintenance
Clean
the unit only as recommended
in the Operating
Instructions.
Damaue Reuuirina Service
Have the unit serviced by a qualified service technician if:
- The AC power cord or plug has been damaged
- Foreign objects or liquid have gotten inside the unit
- The unit has been exposed to rain or water
- The unit does not seem to operate normally
- The unit exhibits a marked change in performance
- The unit has been dropped, or the cabinet has been damaged
DO NOT ATTEMPT TO SERVICE THE UNIT YOURSELF.
Check your unit and accessories
AV-X120 Stereo receiver
Remote control
N
~
::
$
FM antenna
Operating Instructions, etc.
AM antenna
e
TABLE OF CONTENTS
PRECAUTIONS ................................................................... 1
PREPARATIONS
CONNECTIONS .................................................................. 3
DSP SURROIJND ................................................................ 8
BASIC OPERATIONS
RADIO RECEIPTION
MANUAL TUNING ............................................................ 10
DIRECT TUNING .............................. . ................................. 10
STATIONS ............... .................................. 11
TIMER
GENERAL
SPECIFICATIONS ............................................................ 15
GUIDE .......................................... 16
PARTS INDEX ................................................................... 16
ENGLISH
2