Windows Xp - IBM T117 User Manual

Driver Installation for Windows XP
This section must be completed
before continuing with the Windows
Auto Setup
XP on page 13
On LCD monitors, unlike
CRTs, a faster refresh rate
does not improve display
quality. IBM recommends using
either 1280 x 1024 at a refresh
rate of 60Hz.
10
To use the Plug and Play feature in Microsoft
be loaded from the IBM Monitor CD.
1. Turn off the computer and all attached devices.
2. Ensure that the monitor is connected correctly.
3. Turn on the monitor and then the system unit. Allow the system to
boot into Windows XP.
4. Open the
DISPLAY PROPERTIES
,
SETTINGS CONTROL PANEL
icon.
5. Click the
SETTINGS
6. Click the
ADVANCED
7. Click the
MONITOR
8. Click the
PROPERTIES
9. Click the
DRIVER
10. Open the Hardware Update Wizard window by clicking on
and then click the
DRIVER
11. Select the "Install from a list or Specific location (Advanced)" and
then click the
NEXT
12. Insert the Setup CD into the CD drive and click the
button.
13. Click OK.
14. Ensure that the CD drive letter is selected, and then select the
'Drivers' folder.
15. Choose
IBM 4943/4944 monitor
from the CD to your hard disk drive.
16. Close all open windows and remove the CD.
17. Restart the system.
The system will automatically select the maximum refresh rate and
corresponding Color Matching Profiles.
window by clicking
and then double-clicking the
tab.
button.
tab.
button.
tab.
button.
NEXT
button.
and click OK. The files will be copied
Windows XP files should
® ®
,
START
DISPLAY
UPDATE
HAVE DISK