Increasing Memory; Displaying Memory Information - HP Compaq NX7000 Reference Manual

To restart the card, remove, then reinsert, the card. For
instructions, see "Inserting an SD Card or MMC" and "Removing
an SD Card or MMC" in this chapter.

Increasing Memory

You can increase the amount of RAM (random access memory)
in the notebook with an optional HP-approved memory module.
The notebook memory slot supports one 128-MB, 256-MB,
512-MB, or 1024-MB memory module.
Some notebook models ship with a vacant memory slot. On other
models the memory slot contains a preinstalled memory module
that can be replaced at any time.

Displaying Memory Information

When RAM is increased, the operating system increases the hard
drive space reserved for the hibernation file.
If you experience problems with Hibernation after increasing
RAM, verify that your hard drive has enough free space for the
larger hibernation file.
To display the amount of RAM in the system:
Select Start > Control Panel > Performance and
Maintenance icon > System icon > General tab.
To display both the amount of free space on your hard drive
and the amount of space required by the hibernation file:
Select Start > Control Panel > Performance and
Maintenance icon > Power Options icon > Hibernate tab.
Startup and Reference Guide—Part 2
Hardware Options and Upgrades
8–9