GoVideo D2740 Quick Start

D2740
Wireless Media Receiver +

DVD Player

Quick Start

Welcome to the D2740 Quick Start Guide—the
fastest way to get started using your DVD Player.
Just follow these easy steps, from unpacking and
setting up to streaming movies, music, and
pictures from your PC to your TV.
If for some reason you need additional help,
please make sure you have followed every step
in this Quick Start and have referred to the
User's Guide before calling customer service.
1
Unpack
WIRELESS MEDIA RECEIVER + DVD PLAYER • D2740
1 PHONES 2 1 VOLUME 2
POWER PREV NEXT OPEN/CLOSE STOP PLAY PAUSE
– + – +
DVD Player
Remote Control 2 AAA Batteries
Installation CD
Wireless Antennas
Use this cable in step 2
User's Guide/
Audio/Video Cable Registration Card
2
Install Media Server on PC
1 Turn on your PC and close all open programs.
2 Insert the Installation CD into the CD-ROM drive.
3 Click "Install Media Server Software" to begin the
Installation Wizard.
4 Follow the Installation Wizard to install the
software.
5 When prompted, enter the following 16-digit CD
key:
• FVD3 ATCD EBCT BKC5
6 When installation is finished, you may be prompted
to restart your computer.
• The Media Server software is added to your Start menu so that it is launched
automatically whenever your computer is started.
• The Media Server icon will always appear in
the Windows system tray at the lower right
corner of the screen:
4
Connect to Network
1 Connect the supplied wireless antennas to the
rear panel antenna jacks.
OR
2 Connect an Ethernet cable from the RJ-45 port on
the DVD Player to any available router or hub port
in your home network.
CENTER SUR.(R) FRONT (R) R C /P
B
RJ-45
SUB W. SUR.(L) FRONT (L) L C
/P
P
5.1 CHANNEL 2 CH. PROGRESSIVE/COMPONENT OUT
or
Wireless Wired
(Antennas) (Ethernet)
Note: For advanced connections, please refer to pages 17-19 of the User's Guide
5

Connect to TV

1 Connect the unit to your TV as shown.
2 Plug in the DVD Player.
3 Turn on the DVD Player.
4 Turn on your TV and select the TV's Video
input.
• The GoVideo splash screen appears briefly,
followed by the Network main menu.
5 Continue with Step 6 (on reverse side) to
stream media files from your PC to your TV.
DVD Player
Y VIDEO OPTICAL
B
COAXIAL S-VIDEO DIGITAL
P
AUDIO
3
Import Media Files
1 The first time you launch the Media Server software
you will be prompted to import media:
• Click Yes to continue.
2 Choose the Hard Drive Scanner, and click OK to
continue.
3 Select the folder(s) on your hard drive you wish to
scan.
• A check mark will appear next to each folder you
select.
4 Click Scan to import media files into the Media
Server library. Compatible files include:
• Music - MP3 and WMA
• Movies - MPEG1/2/4, AVI, DivX, and DVR-MS
• Pictures - JPEG, BMP, TIF, PSD, PCT, PNG and GIF
• Only those files scanned into the Media Server library will be viewable on your TV.
• Scanning may take several minutes depending on the number of media files found.
• Your PC must be on with the Media Server installed (the icon should appear in the Windows
system tray) in order to view media files on your TV.
DVD Player
CENTER SUR.(R) FRONT (R) R C Y VIDEO OPTICAL
/P
RJ-45 B B
SUB W. SUR.(L) FRONT (L) L C COAXIAL S-VIDEO DIGITAL
/P
P P
AUDIO
5.1 CHANNEL 2 CH. PROGRESSIVE/COMPONENT OUT