Gigabyte GA-X38T-DQ6 User Manual page 56

System Memory Multiplier (SPD)
Allows you to set the system memory multiplier. Options are dependent on CPU FSB. Auto sets
memory multiplier according to memory SPD data. (Default: Auto)
Memory Frequency (Mhz)
The first memory frequency value is the normal operating frequency of the memory being used;
the second is the memory frequency that is automatically adjusted according to the CPU Host
Frequency (Mhz) and System Memory Multiplier settings.
High Speed DRAM DLL Settings
Provides two different memory timing configurations. If your system becomes unstable after you
overclock the DDR2 memory, select Option 1 or Option 2 to help make your system more stable.
Option 1 Memory Timing Configuration 1. (Default)
Option 2 Memory Timing Configuration 2.
DRAM Timing Selectable (SPD)
Manual allows all DRAM timing control items below to be configurable.
Options are: Auto (default), Manual.
CAS Latency Time
Options are: Auto (default), 4~10.
DRAM RAS# to CAS# Delay
Options are: Auto (default), 1~15.
DRAM RAS# Precharge
Options are: Auto (default), 1~15.
Precharge delay (tRAS)
Options are: Auto (default), 1~31.
ACT to ACT Delay (tRRD)
Options are: Auto (default), 1~15.
Rank Write To READ Delay
Options are: Auto (default), 1~31.
Write To Precharge Delay
Options are: Auto (default), 1~31.
Refresh to ACT Delay
Options are: 0~255 (Default: 0)
Read To Precharge Delay
Options are: Auto (default), 1~15.
tRD
Options are: Auto (default), 1~31.
tRD Phase Adjustment
Options are: Auto (default), 1~31.
GA-X38T-DQ6 Motherboard - 56 -