Advanced Bios Features - Gigabyte GA-M61SME-S2L User Manual

2-4

Advanced BIOS Features

AMD K8 Cool&Quiet control
Hard Disk Boot Priority
First Boot Device
Second Boot Device
Third Boot Device
Password Check
HDD S.M.A.R.T. Capability
Away Mode
Init Display First
Frame Buffer Size
Onboard GPU
: Move Enter: Select
F5: Previous Values
AMD K8 Cool&Quiet control
Auto
Disabled
Hard Disk Boot Priority
Specifies the sequence of loading the operating system from the installed hard drives. Use the up
or down arrow key to select a hard drive, then press the plus key <+> (or <PageUp>) or the minus
key <-> (or <PageDown>) to move it up or down on the list. Press <Esc> to exit this menu when
finished.
First/Second/Third Boot Device
Specifies the boot order from the available devices. Use the up or down arrow key to select a
device and press <Enter> to accept. Options are: Floppy, LS120, Hard Disk, CDROM, ZIP,
USB-FDD, USB-ZIP, USB-CDROM, USB-HDD, Legacy LAN, Disabled.
Password Check
Specifies whether a password is required every time the system boots, or only when you enter
BIOS Setup. After configuring this item, set the password(s) under the Set Supervisor/User
Password item in the BIOS Main Menu.
Setup
System
HDD S.M.A.R.T. Capability
Enables or disables the S.M.A.R.T. (Self Monitoring and Reporting Technology) capability of your
hard drive. This feature allows your system to report read/write errors of the hard drive and to
issue warnings when a third party hardware monitor utility is installed. (Default: Disabled)
CMOS Setup Utility-Copyright (C) 1984-2007 Award Software
Advanced BIOS Features
+/-/PU/PD: Value
F6: Fail-Safe Defaults
Lets the AMD Cool'n'Quiet driver dynamically adjust the CPU clock and VIA to
reduce heat output from your computer and its power consumption. (Default)
Disable this function.
A password is only required for entering the BIOS Setup program. (Default)
A password is required for booting the system and for entering the BIOS Setup
program.
[Auto]
[Press Enter]
[Floppy]
[Hard Disk]
[CDROM]
[Setup]
[Disabled]
[Disabled]
[PEG]
[64MB]
[Enable If No Ext PEG]
F10: Save
- 37 -
Item Help
Menu Level
ESC: Exit F1: General Help
F7: Optimized Defaults
BIOS Setup