Power Management Setup - Gigabyte GA-K8N Ultra-SLI User Manual

Legacy USB Storage detect
Enabled
Disabled
2-4

Power Management Setup

CMOS Setup Utility-Copyright (C) 1984-2005 Award Software
ACPI Suspend Type
Soft-Off by Power button
PME Event Wake Up
Modem Ring On
USB Resume from Suspend
Power-On by Alarm
x Day of Month Alarm
x Time (hh:mm:ss) Alarm
Power On By Mouse
Power On By Keyboard
x KB Power ON Password
AC BACK Function
: Move Enter: Select
F5: Previous Values
ACPI Suspend Type
S1(POS) Set ACPI suspend type to S1/POS(Power On Suspend). (Default value)
S3(STR) Set ACPI suspend type to S3/STR(Suspend To RAM).
Soft-Off by Power button
Instant-off Press power button then Power off instantly. (Default value)
Delay 4 Sec Press power button 4 seconds to Power off. Enter suspend if button is pressed less
than 4 seconds.
PME Event Wake Up
This feature requires an ATX power supply that provides at least 1A on the 5VSB lead.
Disabled Disable this function. (Default value)
Enabled Enable PME as wake up event.
Modem Ring On
An incoming call via modem can awake the system from any suspend state.
Disabled Disable Modem Ring on function. (Default value)
Enabled Enable Modem Ring on function.
USB Resume from Suspend
Disabled Disable this function. (Default value)
Enabled Enable USB device wake up system from suspend type.
Power-On by Alarm
You can set "Resume by Alarm" item to enabled and key in Date/Time to power on system.
Disabled Disable this function. (Default value)
Enabled Enable alarm function to POWER ON system.
If Power-On by Alarm is Enabled.
K8 nForce4 SLI Series Motherboard
Enable USB storage detection in the MS-DOS environment. (Default
value)
Disable this function.
Power Management Setup
[S1(POS)]
[Instant-off]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
Everyday
0 : 0 : 0
[Disabled]
[Disabled]
Enter
[Soft-Off]
+/-/PU/PD: Value F10: Save
- 44 -
Item Help
Menu Level
ESC: Exit F1: General Help
F7: Optimized Defaults