Usb Controller - Gigabyte GA-EP45T-DS3 User Manual

SATA AHCI Mode (Intel ICH10 Southbridge)
Configures the SATA controllers integrated in the Intel ICH10 Southbridge to AHCI mode.
Disabled
AHCI
(Note)
SATA Port0-3 Native Mode
Specifies the operating mode of the integrated SATA controllers.
Disabled
Enabled

USB Controller

Enables or disables the integrated USB controller. (Default: Enabled)
Disabled will turn off all of the USB functionalities below.
USB 2.0 Controller
Enables or disables the integrated USB 2.0 controller. (Default: Enabled)
USB Keyboard Support
Allows USB keyboard to be used in MS-DOS. (Default: Disabled)
USB Mouse Support
Allows USB mouse to be used in MS-DOS. (Default: Disabled)
Legacy USB storage detect
Determines whether to detect USB storage devices, including USB flash drives and USB hard
drives during the POST. (Default: Enabled)
Azalia Codec
Enables or disables the onboard audio function. (Default: Auto)
If you wish to install a 3rd party add-in audio card instead of using the onboard audio, set this item
to Disabled.
Onboard H/W 1394
Enables or disables the onboard 1394 function. (Default: Enabled)
Onboard H/W LAN1/LAN2
Enables or disables the onboard LAN function. (Default: Enabled)
If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item
to Disabled.
Green LAN
When the onboard LAN function and Green LAN are enabed, the system will dynamically detects
if LAN cable(s) is connected or not. If not, the corresponding LAN controller will be disabled
automatically. (Default: Disabled)
Only for GA-EP45T-DS3.
(Note) Supported on Windows
GA-EP45T-DS3R/DS3 Motherboard
Disables AHCI for the SATA controllers and configures the SATA controllers to
PATA mode. (Default)
Configures the SATA controllers to AHCI mode. Advanced Host Controller Interface
(AHCI) is an interface specification that allows the storage driver to enable
advanced Serial ATA features such as Native Command Queuing and hot plug.
Allows the SATA controllers to operate in Legacy IDE mode.
In Legacy mode the SATA controllers use dedicated IRQs that cannot be shared
with other device. Set this option to Disabled if you wish to install operating
systems that do not support Native mode, e.g. Windows 9X/ME. (Default)
Allows the SATA controllers to operate in Native IDE mode.
Enable Native IDE mode if you wish to install operating systems that support
Native mode, e.g. Windows XP.
Vista operating system only.
® ®
- 52 -