Gigabyte GA-EP45-DS3 User Manual page 50

Delay For HDD (Secs)
Allows you to set a delay time for the BIOS to initialize the hard drive as the system boots up.
The adjustable range is from 0 to 15 seconds. (Default: 0)
Full Screen LOGO Show
Allows you to determine whether to display the GIGABYTE Logo at system startup. Disabled
displays normal POST message. (Default: Enabled)
Init Display First
Specifies the first initiation of the monitor display from the installed PCI graphics card or
PCI Express graphics card.
PCI
PEG
PEG2
GA-EP45-DS3R/DS3 Motherboard
Sets the PCI graphics card as the first display. (Default)
Sets PCI Express graphics card on the PCI Express x16 slot (PCIEX16_1)
as the first display.
Sets PCI Express graphics card on the PCI Express x8 slot (PCIEX8_1) as the
first display.
- 50 -