Gigabyte GA-965P-DS4 User Manual page 37

Intel coretm 2 extreme quad-core / coretm 2 quad / intel coretm 2 extreme dual-core / coretm 2 duo / intel pentium processor extreme edition / intel pentium d / pentium 4 lga775 processor motherboard
Hide thumbs Also See for GA-965P-DS4:
Table of Contents

Advertisement

HDD S.M.A.R.T. Capability
This feature allows your hard disk to report read/write errors and to issue warnings when third-
party hardware monitor utility is installed.
Enabled
Enable HDD S.M.A.R.T. capability.
Disabled
Disable HDD S.M.A.R.T. capability. (Default value)
CPU Hyper-Threading
Enabled
Enable CPU Hyper Threading Feature. Please note that this feature is only
working for operating system with multi processors mode supported. (Default
value)
Disabled
Disable CPU Hyper Threading.
Limit CPUID Max. to 3
Enabled
Limit CPUID Maximum value to 3 when use older OS like NT4.
Disabled
Disable CPUID Limit for windows XP. (Default value)
No-Execute Memory Protect
Enabled
Enable No-Execute Memory Protect function. (Default value)
Disabled
Disable No-Execute Memory Protect function.
CPU Enhanced Halt (C1E)
Enabled
Enable CPU Enhanced Halt (C1E) function. (Default value)
Disabled
Disable CPU Enhanced Halt (C1E) function.
CPU Thermal Monitor 2 (TM2)
Enabled
Enable CPU Thermal Monitor 2 (TM2) function. (Default value)
Disabled
Disable CPU Thermal Monitor 2 (TM2) function.
CPU EIST Function
Enabled
Enable CPU EIST function. (Default value)
Disabled
Disable CPU EIST function.
Virtualization Technology
Enabled
Enable Virtualization Technology function. (Default value)
Disabled
Disable Virtualization Technology function.
Full Screen LOGO Show
Enabled
Show full screen logo at system startup. (Default value)
Disabled
Disable this function. If you wish to see BIOS POST screen, set this item to
"Disabled".
Init Display First
This feature allows you to select the first initiation of the monitor display from which card when you
install a PCI card and a PCI Express VGA card on the motherboard.
PCI
Set Init Display First to PCI VGA card. (Default value)
PEG
Set Init Display First to PCI Express VGA card (the PCIE_16_1 slot).
PEG2
Set Init Display First to PCI Express VGA card (the PCIE_16_2 slot).
(Note) This item will show up when you install a processor that supports this function.
(Note)
(Note)
(Note)
(Note)
(Note)
(Note)
(Note)
- 37 -
BIOS Setup

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents