Gigabyte GA-945P-DS3 User Manual page 45

O.C. FSB1333 Core. 2 CPU
Enable use of a Core 2 CPU with 1333 MHz FSB through overclocking. To enable this feature,
TM
you must install DDRII 533 memory module(s) and a Core
Disabled Disable the use of a Core
Enabled Enable the use of a Core
CPU Host Clock Control
Please note that if your system is overclocked and cannot restart, please wait 20secs.
for automatic system restart or clear the CMOS setup data and perform a safe restart.
Disabled Disable CPU Host Clock Control. (Default value)
Enabled Enable CPU Host Clock Control.
CPU Host Frequency (Mhz)
100MHz ~ 600MHz
If you use a 533 MHz FSB processor, set "CPU Host Frequency" to 133 MHz.
If you use an 800 MHz FSB processor, set "CPU Host Frequency" to 200 MHz.
If you use a 1066 MHz FSB processor, set "CPU Host Frequency" to 266 MHz.
Incorrect using it may cause your system broken. For power End-User use only!
PCI Express Frequency (Mhz)
Auto Set PCI Express frequency automatically. (Default value)
90~150 Set PCI Express frequency from 90 MHz to 150 MHz.
System Memory Multiplier
The adjustable range will vary based on the CPU FSB. Default value: Auto (set memory
frequency by DRAM SPD data). Wrong frequency settings may cause system unable to boot.
Clear CMOS to overcome wrong frequency issue.
Memory Frequency (Mhz)
The values depend on CPU Host Frequency (Mhz) and System Memory Multiplier setting.
DIMM OverVoltage Control
Please note that by overclocking your system through the increase of the DIMM voltage, damage
to the memory may occur.
Normal Supply DIMM voltage as DIMM required. (Default value)
+0.1V ~ +0.7V Increase DIMM voltage by 0.1V ~ 0.7V.
PCI-E OverVoltage Control
Normal Supply PCI-E voltage as PCI-E required. (Default value)
+0.1V ~ +0.3V Increase PCI-E voltage by 0.1V ~ 0.3V.
FSB OverVoltage Control
Normal Supply FSB voltage as FSB required. (Default value)
+0.1V ~ +0.3V Increase FSB voltage by 0.1V ~ 0.3V.
CPU Voltage Control
Supports adjustable CPU vcore. The adjustable range is dependent on CPUs.
(Default value: Normal)
Please note that by overclocking your system through the increase of the CPU voltage, damage
to the CPU or decrease in the CPU life expectancy may occur.
Normal CPU Vcore
Display your CPU's normal voltage.
2 CPU (1333 MHz FSB). (Default value)
TM
2 CPU (1333 MHz FSB).
TM
Set CPU Host Frequency from 100 MHz to 600 MHz.
- 45 -
2 CPU.
TM
BIOS Setup