Gigabyte GA-8GNXP-D User Manual page 38

Onboard H/W LAN (LAN1 port)
Enabled
Disabled
Onboard H/W LAN2 (LAN2 port)
Enabled
Disabled
Onboard LAN1 Boot ROM (LAN1 port)
This function decide whether to invoke the boot ROM of the onboard LAN chip.
Enabled
Disabled
Onboard LAN2 Boot ROM (LAN2 port)
This function decide whether to invoke the boot ROM of the onboard LAN chip.
Enabled
Disabled
Onboard Serial Port 1
Auto
3F8/IRQ4
2F8/IRQ3
3E8/IRQ4
2E8/IRQ3
Disabled
Onboard IrDA Port
Auto
3F8/IRQ4
2F8/IRQ3
3E8/IRQ4
2E8/IRQ3
Disabled
UART Mode Select
This item allows you to determine which Infra Red(IR) function of Onboard I/O chip.
IrDA
ASKIR
UR2 Duplex Mode
This feature allows you to seclect IR mode.
Half
Full
Onboard Parallel port
Disabled
378/IRQ7
278/IRQ5
3BC/IRQ7
GA-8GNXP-D Motherboard
Enable onboard H/W LAN function. (Default value)
Disable this function.
Enable onboard H/W LAN2 function. (Default value)
Disable this function.
Enable this function.
Disable this function. (Default value)
Enable this function.
Disable this function. (Default value)
BIOS will automatically setup the port 1 address.
Enable onboard Serial port 1 and address is 3F8. (Default value)
Enable onboard Serial port 1 and address is 2F8.
Enable onboard Serial port 1 and address is 3E8.
Enable onboard Serial port 1 and address is 2E8.
Disable onboard Serial port 1.
BIOS will automatically setup the port 1 address.
Enable onboard IrDA port and address is 3F8.
Enable onboard IrDA port and address is 2F8. (Default value)
Enable onboard IrDA port and address is 3E8.
Enable onboard IrDA port and address is 2E8.
Disable onboard IrDA port.
Set onboard I/O chip UART to IrDA Mode. (Default value)
Set onboard I/O chip UART to ASKIR Mode.
IR Function Duplex Half. (Default value)
IR Function Duplex Full.
Disable onboard LPT port.
Enable onboard LPT port and address is 378/IRQ7. (Default value)
Enable onboard LPT port and address is 278/IRQ5.
Enable onboard LPT port and address is 3BC/IRQ7.
- 38 -