TRENDnet User's Guide
Advanced Router Setup
Access your router management page
Note: Your router management page
your Internet web browser (e.g. Internet Explorer, Firefox, Chrome, Safari, Opera) and
will be referenced frequently in this User's Guide.
1. Open your web browser (e.g. Internet Explorer, Firefox, Safari, Chrome, or Opera) and
go to http://192.168.10.1. Your router will prompt you for a user name and password.
2. Enter the default user name and password and then click OK.
Note: Other web browsers may display a Log In or Submit button instead of OK.
Default User Name: admin
Default Password: admin
3. At the main Login page, click on Advanced Setup.
© Copyright 2012 TRENDnet. All Rights Reserved.
http://192.168.10.1
is accessed through the use of
Change your router login password
Advanced Setup > System > Administrator Settings
1. Log into your router management page (see "Access your router management page"
on
page
16).
2. Click on Advanced Setup and click on System, then click on Administrator Settings.
3. Under the Password section, in the Current Password field, type in your current
password assigned to the router (Default Password: admin). In the Password field, enter
the new password, and in the Re-type password field, retype the new password again
to confirm.
4. Click Apply at the bottom of the page to apply the changes. After the settings have
been applied, click Continue on the following page.
Note: If you would like to discard the changes, click Cancel before you click Apply.
Note: If you change the router login password, you will need to access the router
management page using the User Name "admin" and the new password instead of the
default password "admin".
TW100-BRF214
16