Table of Contents
Advertisement
3.1.2.7. Auto Profile Selection Management
The auto selection feature allows the adapter to automatically select a profile from the list of
profiles and use it to connect to the network. To add a new profile into the Auto Selected Profiles
list, please follow these steps.
1.
On the Profile Management screen (shown in
2.
The Auto Profiles Selection management window will appear (shown in
list of all created profiles in the Available Profiles.
3.
Highlight the profiles to add to auto profile selection, and click Add. The profile will appear in
the Auto Selected Profiles box.
4.
Highlight a profile in the Auto Selected Profiles box.
5.
Click Move Up or Move Down as appropriate.
Note:
The first profile in the Auto Selected Profiles box has highest priority, while the last profile has the
lowest priority.
6.
Click OK.
7.
Check the Auto Select Profiles checkbox on the Profile Management tab (shown in
3-2
).
Note:
When auto profile selection is enabled by checking Auto Select Profiles on the Profile
Management tab, the client adapter will scan for an available network. The profile with the
TL-WN821N
300Mbps Wireless N USB Adapter
Figure 3-2
), click Order Profiles....
X
X
X
Figure 3-11
26
Figure 3-11
) with a
X
X
Figure
X
X
Advertisement
Table of Contents
