Casio YC-400 - 1 Quick Manual

Capture and record information on whiteboard
Capture and record handwriting information on whiteboard combines with projection image on the same whiteboard
1
Click Presentation and select Board Area Capture Mode
2
Point camera part at the whiteboard
3
Adjust capturing frame by wide and tele
on Window of Board Area Capture
4
Click shutter button on dialog box to capture image
Before correction
*For more information, see Software User's Guide
In case of recording area same as projection area, click Projection Area Capture
to capture handwritten combined with original projection image as an image file
*For more information, see Software User's Guide
Project stored image on computer
Preview list area
1 Click PC Image Mode
(thumbnails of all images stored in computer)
button
Thumbnail of image files on
preview list area appears
2
Double-click a thumbnail
for projection
Click Full Screen/Full Screen Off
to go back to preview list area
Play list area
(assort images for projection in sequence)
*For more information, see Software User's Guide
Project images recorded by detached camera unit
Project imaged stored in camera unit by attached back to YC-400' stand without transferring data from camera
1 Attach back camera unit into YC-400's stand after
recording images
1
2
2
Click Camera Image Mode button
Preview list of images recorded
Preview list area
(all images stored on camera unit)
by camera unit appears
3
Double-click a thumbnail
for projection
Play list area
*For more information, see Software User's Guide (Assort images for projection in sequence)
http://world.casio.com/
Board Area Capture Mode
Recording area
button
Image preview dialog box
Image projection area
Recording area
button
Image projection area
Select PC image mode
Useful function of PC image mode
Assort stored images for projection in sequence
Select images on preview list,
and drag and drop them to
play list area
Camera Image Mode
Useful function of Camera image mode
Correct image taken from diagonal angle
Automatically correct distortion in a image
in Business Shot Mode
AUTO
before correction after correction
Click Specify Contour button for manual correction
Assort images for
projection in sequence
Select images on preview
list area, and drag and drop
them to play list area
Multifunctional Camera System Multifunctional Camera System
Quick Guide
*The Multi PJ startup mode provides access to all of the features and
functions (document camera, scanner, etc.) of the PJ Camera Software.
This Quick Guide provides you with a comprehensive overview of
what you can do with the PJ Camera Software.
1
INSTALL SOFTWARE
[Board Area Capture]
Install YC400's software from
CD-ROM bundled with this
product on a Computer
*For more information, see YC-400 User's Guide
[Projection Area Capture]
2
SET UP YC-400
1 Unfold stage and stand of YC-400
Camera unit removed
from YC400 can be
used as stand-alone
digital camera
*For more information, see YC-400 User's Guide
3
CONNECTION
Connect YC-400, projector and computer
YC-400 and computer connected by USB cable bundled with this product
Projector
*For more information, see YC-400 User's Guide
When
case
closed
Multi PJ Startup Mode
Insert camera battery (NP-20) bundled
with this product into camera unit
Attach bracket screwing by using like a coin
4
Turn on power button
Software will start up automatically and
a dialog will appear.
Computer
All operations of YC-400 are controlled
by PJ Camera Software
Never touch YC-400 while the automatic
camera position adjustment operation is
RGB Cable
being performed because Auto Sensor is
in process.
USB Cable
Dialog Box
Make sure that you are using the AC adaptor to supply
power to the camera when using the document stand.
Image recording under battery power may not be possible Select Multi PJ Mode
when battery power is low.
*For more information, see YC-400 User's Guide
*RGB Cable is not bundled with this product
After the computer starts up, make sure PJ Camera
Software icon is in the Windows taskbar.
Unfold arm for camera unit
until it snaps
At folding of YC-400,
camera unit is to be
removed to avoid
unnecessary damages
2 Attach camera unit to YC400 stand
until it clicks securely
START UP PJ Camera Software
on YC400 stand, PJ camera
RJA515228-005