Table of Contents
Advertisement
OTHER SETTINGS
1.
Insert the memory card you created using one
of the procedures under "Transferring Menu
Language Data to a Memory Card" on page 133
into the camera.
2.
Hold down MENU as you turn on the camera.
• To turn on the camera, align the power/function switch
with
or
.
• The above screen does not appear if you are running
on battery power and your batteries are too low. The
normal camera display screen appears instead. If this
happens, switch to AC adaptor power or load a new
set of recommended batteries into the camera.
• If the camera has multiple menu language data files
installed, you can rock the control button up or down to
select a data file.
3.
Press the shutter release button.
• The message "NOW LOADING" appears on the moni-
tor screen, indicating that menu language data is be-
ing loaded.
• The message "COMPLETE!" appears when the menu
data loading procedure is complete. After about four
seconds, the monitor screen changes to the normal
camera display.
135
Advertisement
Table of Contents
