Test (Skywatch); Not Displayed; Tas Fail; Tas Data Fail - Garmin 20 Pilot's Manual

Detailed Operation
TAS/TCAD Traffic

Test (Skywatch)

TAS Test will be displayed if the Traffic sensor is in the Test Mode.

Not Displayed

An amber "Traffic Not Displayed" will be shown if the GPS position or the Traffic sensor has failed.

TAS Fail

System Failure, shown in amber.

TAS Data Fail

Label set sent by the Skywatch unit has failed the integrity check. Shown in amber.

TAS Time-Out

MX20 is not receiving labels from the TAS unit. Shown in amber.

No Bearing Advisories

Traffic advisories without a valid bearing will be listed in text form below the ownship symbol.

TAS Menu Options

Traffic Alert Mode (Pop-Up/Prompt)
The Traffic Alert mode allows you to configure the currently selected Traffic Alert response. If Pop Up is
selected, the Traffic function will automatically pop up when a Traffic Alert occurs. If the Prompt mode is
selected, the Traffic Alert hot key prompt is shown when a Traffic Alert occurs. If the Traffic function is already
being viewed, neither will occur.

Standby Mode

The Standby mode places the TAS unit into the standby mode. In this mode, the unit will not display
traffic targets or generate traffic alerts. See the TAS Users Guide for additional information.
38