Fujitsu Lifebook T580 User Manual page 37

3
To enable or disable the Light Sensor utility, check or uncheck the box in the Enabled column, then click the
[Apply] button.
4
For more information about the light sensor, click on Light Sensor icon in the Sensor column to the right of the
light sensor icon to open the Sensor Properties window.
5
From the Sensor Properties window, you can change the sensor's description, uninstall the sensor, or enable
or disable selected users.
•
To change the sensor's description, click the [Change description] button, enter the new description, and
click the [OK] button.
•
To limit who can access the sensors, click Change who can access sensors, then check or uncheck the
box adjacent to the individual you would like to grant or prohibit access.
•
To uninstall the sensor, click Uninstall this sensor.
Precautions
Opening and Closing the Cover
By default, closing the cover automatically places your system into Sleep mode.
To change the default when the cover is closed:
1
Open the system Control Panel and select Power Options.
2
Click Choose what closing the lid does in the left pane.
3
Select the desired action for When I close the lid, then click the [Save changes] or [Apply] button (depending
upon your operating system).
36 - Display Panel