Create A New Directory; Remove A Directory - Cisco MWR 1941-DC - 1941 Mobile Wireless Router Hardware Installation Manual

Chapter 3 Installing the Router

Create a New Directory

To create a directory in CF memory, use the mkdir slot0: directory-name command.
The following example shows output for first displaying the contents of an external CF card, and then
creating a directory named config and a subdirectory named test-config:
Router# dir slot0:
Directory of slot0:/
3
128094208 bytes total (121634816 bytes free)
Router# mkdir slot0:/config
Create directory filename [config]?
Created dir slot0:/config
Router# mkdir slot0:/config/test-config
Create directory filename [/config/test-config]?
Created dir slot0:/config/test-config
Router# dir slot0:
Directory of slot0:/
3
1580
128094208 bytes total (121626624 bytes free)
Router# cd slot0:/config
Router# dir slot0:
Directory of slot0:/config/
1581
128094208 bytes total (121626624 bytes free)

Remove a Directory

To remove a directory from CF memory, use the rmdir slot0:/directory-name command.
Before you can remove a directory, all files and subdirectories must be removed from the directory.
The following example shows output for displaying the contents of an external CF card, then removing
the subdirectory named test-config:
Router# dir slot0:
Directory of slot0:/config/
1581
128094208 bytes total (121626624 bytes free)
Router# rmdir slot0:/config/test-config
78-15827-06B0
-rw- 6458208 Mar 01 1993 00:04:08
-rw- 6458208 Mar 01 1993 00:04:08
drw- 0 Mar 01 1993 23:48:36
drw- 0 Mar 01 1993 23:50:08
drw- 0 Mar 01 1993 23:50:08
Cisco MWR 1941-DC Mobile Wireless Edge Router Hardware Installation Guide
Replacing or Upgrading the CF
mwr1941-i-mz.tmp
mwr1941-i-mz.tmp
config
test-config
test-config
3-19