Casio EX-Z3 - 4 Function Manual page 10

VIEWING IMAGES ON A COMPUTER
8.
After making sure the camera is turned off,
place the camera onto the USB cradle.
• Do not place the camera onto the USB cradle while it
is turned on.
9.
Press the USB cradle's [USB] button.
• This will cause the "New Hardware..." dialog box to
appear on the computer screen as the computer
automatically detects the camera's file memory. After
you install the USB driver, "New Hardware..." dialog
box will no longer appear when you perform the
above steps to establish a USB connection.
• Pressing the [USB] button enters the USB mode,
which causes the USB cradle's [USB] lamp to light
green (page 158).
• At this point, some operating systems will display a
"Removable Disk" dialog box. If your operating
system does, close the dialog box.
127
[USB] button
[USB] lamp