Using The Alarm; To Set An Alarm - Casio EX-Z3 - 3 Deleting Files Manual

OTHER SETTINGS
IMPORTANT!
• The snapshot image or movie that you select as the
startup image is stored in a special memory location
called "startup image memory". Only one image can
be stored in startup image memory at one time.
Selecting a new startup image overwrites anything
that is already stored in startup image memory.
Because of this, if you want to return to a previous
startup image, you need to have a separate copy of
that image in the camera's standard image memory.
Note that you cannot delete an image from startup
image memory. You can only replace it with another
image.

Using the Alarm

You can configure up to three alarms that cause the
camera to beep and display a specified image at the time
you specify.

To set an alarm

1.
In the PLAY mode, press [MENU].
2.
Select the "PLAY" tab, select "Alarm", and
then press [ ].
3.
Use [ ] and [ ] to select the alarm whose
setting you want to configure, and then press
[ ].
4.
Use [ ] and [ ] to select the setting you want
to change, and then use [ ] and [ ] to
change the selected setting.
• You can set an alarm time and configure the alarm to
sound either once or at the same time everyday. You
can also turn the alarm on or off.
110