Analogue alarm clock for under-pillow vibrator (12 pages)
Summary of Contents for Casio DQR-100
Page 1
MA0308-EA Operation Guide DQR-100 Main unit Sub-unit °C/ °F RESET TEMP. CLEAR MAX/MIN °C/ °F RESET RESET TEMP. CLEAR MAX/MIN RESET • A sticker is affixed to the glass of this clock when you purchase it. Be sure to remove the sticker before using the clock.
Operation Guide DQR-100 GENERAL GUIDE Main unit 1 SNOOZE/LIGHT button • Press this button to illuminate the display for about four seconds. • Pressing this button while the alarm is sounding stops the alarm. 2 Alarm Time Set buttons Use these buttons to change the alarm time or current time setting.
Operation Guide DQR-100 Setting the Time and Date Manually USING THE ALARM • When using the clock in an area that is outside of the range of the transmitter in Mainflingen or in an area where The alarm sounds and the light turns on when the alarm time you set is reached. You can also use the Alarm signal reception is impossible for some reason, you need to manually adjust the time as required.
Operation Guide DQR-100 BATTERY REPLACEMENT High Temperature and Low Temperature Memory Low Battery Warning • The following data is stored in memory automatically. indicator appears on the display to let you know when battery power is low. Replace the batteries as soon Main unit high temperature and low temperature as possible.
Page 5
Operation Guide DQR-100 USING THE SUB-UNIT Data Transfer from the Sub-unit • Data is transferred from the sub-unit to the main unit every three minutes. • The sub-unit is able to send data to the main unit up to an unobstructed distance of about 30 meters.