(1 fitted to lawnmower & 2 in loose parts pack IMPORTANT ! Please check the contents of the carton are correct BEFORE assembling your new Flymo product. IF ANY PARTS ARE MISSING CONTACT:- Electrolux Outdoor Products Customer Service Department direct...
Page 3
Use only Flymo replacement cable. if the lawnmower starts to vibrate abnormally. 10. Always wind cable carefully, avoiding kinking.
Page 4
IMPORTANT ed to the Terminal which is marked with the letter • Flymo connectors are suitable for use with 2 core 'N' or coloured BLACK. cable only. Under no circumstances should these The wire which is coloured BROWN must be con- nected to the Terminal which is marked with the let- connectors be used for earthed products.
Handle Adjustment • WARNING! STOP THE LAWNMOWER AND WAIT UNTIL THE BLADE HAS STOPPED ROTATING BEFORE ADJUSTING THE HANDLE. • NOTE! REMOVAL OF LOWER HANDLE FIXING PINS IS NOT REQUIRED TO ADJUST THE HAN- TO ADJUST THE HANDLE (C) 1. Hold handle as illustrated. 2.
Starting and Stopping cont... 6. Press and hold the lock-off button (J) on the switch- box, then squeeze one of the Start/Stop levers towards the upper handle (K). 7. Continue to squeeze the start/stop lever towards the upper handle and release the lock-off button. 8.
Yellow Pages. application. To obtain service on your Flymo product simply telephone or 2. Always use genuine Flymo Spare Parts. visit your local Service Centre. 3. Prepacked spares are available from most Electrolux Should you require service under the terms of our guarantee Outdoor Products stockists.
Guarantee & Guarantee Policy Failures not covered by guarantee If any part is found to be defective due to faulty manufacture within the guarantee period, Electrolux Outdoor Products, Replacing worn or damaged blades through its Authorised Service Repairers will effect the Failures as a result of not reporting an initial fault.