Delete Scheduled Or Saved Jobs; Create Configuration Version - Extreme Networks ISM Provision User Manual

On the right-hand side of the window you can select tabs to view created, modified,
and deleted objects in this job. Select the tab of interest, then select the object of
interest by clicking on it. Selected details about the object will be displayed in the
Selected ... Details panel. If you are examining a committed job that was rejected,
you will find useful information in the Job Results tab.
6 Select Close
Select Close to close the window.

Delete Scheduled or Saved Jobs

You can delete jobs that have not yet been committed to the ISM Provision server, but
once a job is committed it cannot be deleted. (Of course, you could review a committed
job and reverse the individual changes you made, then commit. You would probably
want to create a configuration version if you think you might want to later remove a job
you were planning to commit.)
Steps. To delete a scheduled or saved job:
1 View the job in the Scheduled or Saved Jobs tab
See the task, "View Committed, Scheduled, or Saved Jobs", if you need detailed
instructions.
2 Select the Delete button
3 Select Delete to confirm, Cancel otherwise
When you selected the Delete button in step 2, a Delete Job window appears to
confirm your choice. Select the Delete button on the window to delete the job.

Create Configuration Version

See the section, "Configuration Versions", to find out what configuration versions are.
Before you create a configuration version, be sure that any changes you have made to
the configurations in your current session have been committed to the server, or you
have reverted to the current server state.
Configuration versions are created from the Configuration Versioning tab of the
Change Control view of NIM.
Steps. To create a configuration version:
Network Infrastructure Manager User Guide
Change Control Tasks
8-7