Barcode Font Specifications - Epson AcuLaser C9100 Reference Manual

❏ Do not apply shading or special character formatting, such as
bold, italic, or underline.
❏ Print bar codes in black and white only.
❏ When rotating characters, only specify rotation angles of 90°,
180°, and 270°.
❏ Turn off all automatic character and word spacing settings in
your application.
❏ Do not use features in your application that enlarge or reduce
the size of characters in only the vertical or horizontal direction.
❏ Turn off your application's auto-correct features for spelling,
grammar, spacing, etc.
❏ To more easily distinguish bar codes from other text in your
document, set your application to show text symbols, such as
paragraph marks, tabs, etc.
❏ Because special characters such as Start bar and Stop bar are
added when an EPSON BarCode Font is selected, the
resulting bar code may have more characters than were
originally input.
❏ For best results, use only the font sizes recommended in
"BarCode Font specifications" on page 385 for the EPSON
BarCode Font you are using. Bar codes in other sizes may not
be readable with all bar code readers.
Note:
Depending on the print density, or on the quality or color of the paper,
bar codes may not be readable with all bar code readers. Print a sample
and make sure the bar code can be read before printing large quantities.

BarCode Font specifications

This section contains details on the character input specifications
for each EPSON BarCode Font.
Working with Fonts
C
C
C
C
C
C
C
C
C
C
C
C
385