The Controls Of Your Wine Cooler; Control Panel; Setting The Temperature - Danby Silhouette DWC516BLS Owner's Manual

The Controls of
your Wine Cooler
2
1
1. Run:
Indicator light illuminates to signify
the cooling mode is currently in opera-
tion.
2. Upper Chamber Display:
screen shows current cabinet tempera-
ture and set temperature of the upper
zone.
3. Lower Chamber Display:
screen shows current cabinet tempera-
ture and set temperature of the lower
zone.
Setting the
Temperature
When you plug in your
wine cooler for the first
time, the temperature will
automatically be set to
45°F (7°C) and 54°F (12°C)
in the lower and upper
compartments respective-
ly, and will be displayed
in the Fahrenheit scale
Operating Instructions
3
4. C° / F°
Adjacent indicator light denotes which
scale of temperature is displayed.
Display
5. 'Set Upper' Button -
temperature in the upper zone (see
'Setting the Temperature below).
'Set Lower' Button -
Display
temperature in the lower zone (see
'Setting the Temperature below).
• To switch the display
between the Fahrenheit (°F)
and Celsius (°C) scale,
depress the 'Set Upper' and
'Set Lower' control buttons
simultaneously for approximate-
ly five (5) seconds.
• The temperature range can
be set as low as 39°F (4°C) or
as high as 64°F (18°C) to suit
your specific wine storage
requirements. Each depres-
sion of the 'Set Upper' or 'Set
Lower' button will allow you to
adjust the temperature in 1°
degree increments within the
aforementioned range.
6
4
5
Used to set the
Used to set the
• You may view your 'set' tem-
perature at any time by briefly
depressing either the 'Set
Upper' or 'Set Lower' button.
The set temperature will flash
in the display area for 5 sec-
onds before the display
resumes showing the current
cabinet temperature.
Please note: In the event of a
power failure or interruption,
all modified settings are lost
and the default settings are
used once power resumes.