How To Snap Shot A Camera; Snap Shot Camera - TRENDnet TV-IP200W User Manual

will appear. Select "List" and the viewing image will return to
the list view format.
Note 1:
A maximum of 16 cameras are available for viewing with the
IPView application.
Note 2:
Alternatively you can click the 1 Camera icon as illustrated
or use the hot key "Ctrl+F3". For 4 Cameras , 9 Cameras
and 16 Cameras click the respective icon or use the hot
key as follows "Ctrl+F4", "Ctrl+F5" and "Ctrl+F6". To return
to list view format use the hot key "Ctrl+F1".

How to Snap shot a Camera

Snap shot Camera

To snap shot a camera you must highlight the camera you wish to
snap shot from the list view format. From the menu bar select
"Camera" > "Snap shot". A Save Image dialog box will
appear for you to save the snap shot picture.
A second alternative is from the viewing mode either 1, 4, 9, 16
cameras click on the icon located on the upper left corner of the
84