Configure The Wireless Router - TRENDnet TEW-711BR Quick Installation Manual

5. Connect one end of a network cable to the TEW-711BR's WAN port. Connect the other end of the
cable to your modem's network port.
6. Connect the power adapter to the TEW-711BR and then to a power outlet. Push the power button
to the "On" position.
7. Power on your Cable or DSL modem. Wait until the LEDs indicate that modem is fully booted up.
Consult with the modem user's guide for more information.
8. Verify that the following panel lights are on: Power (Green), Status (Green), LAN (port (1, 2, 3, 4)
your computer is connected to) (Green), WAN (Green) and WLAN (Green).

3. Configure the Wireless Router

Note: It is recommended that you configure the Wireless Router from a wired computer.
1. Open your web browser, type http://192.168.10.1 in the Address bar, and then press Enter.
Internet
Cable/DSL Modem
2