Page 2
Regulatory notes and statements Wireless LAN, Health and Authorization for use Radio frequency electromagnetic energy is emitted from Wireless LAN devices. The energy levels of these emissions however are far less than the electromagnetic energy emissions from wireless devices such as mobile phones. Wireless LAN devices are safe for use frequency safety standards and recommendations.
Page 3
frequency exposure limits. Nevertheless, this device shall be used in such a manner that the potential for human contact during normal operation is minimized. When nearby persons has to be kept to ensure RF exposure compliance, in order to comply with RF exposure limits established in the ANSI C95.1 standards, the distance between the antennas and the user should not be less than 20 cm.
Page 4
The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be located or operating in conjunction with any other antenna or transmitter. CE Mark Warning This is a Class B product.
TABLE OF CONTENT Introduction ....................... 1 Overview of this User’s Guide ................1 Unpacking and Setup ....................2 Unpacking ......................2 Setup ........................2 Connecting the USB Extension Cable ..............2 Software Installation ....................3 Windows Based Utility Installation ................ 3 Wireless Utility Setting ..................
INTRODUCTION Congratulations on your purchase of this 300Mbps Wireless N USB Adapter. This manual contains detailed instructions regarding the operation of this product. Please keep this manual for future reference. With the 300Mbps Wireless N USB Adapter, a desktop or laptop computer can communicate with another computer wirelessly.
USB Adapter. Unpacking The box should contain the following items: One TEW-624UB 300Mbps Wireless N USB Adapter One Driver & Utility CD-ROM One Multi-Language Quick Installation Guide If any item is found missing or damaged, please contact your local reseller for replacement.
SOFTWARE INSTALLATION This section describes how to install the driver and utility for the 300Mbps Wireless N USB Adapter. Windows Based Utility Installation 1) Insert the Utility and Driver CD-ROM into your computer’s CD-ROM Drive and then click Install Utility. 2) Follow the InstallShield Wizard Instructions...
3) Click Finish to restart the computer. 4) Plug the 300Mbps Wireless N USB Adapter into an available USB slot on your computer Wireless Utility Setting The user can configure the wireless settings using the Wireless Adapter Configuration Utility. Double-click the utility icon that appears in the taskbar. The Wireless Adapter Configuration Utility is divided into five sections: Link Info, Configuration, Advanced, Site Survey and About.
I. Link Information This is the default screen after launching the Utility program. Status: Shows the associated BSSID, which can be used to identify the wireless access point. SSID: Shows the current SSID, which must be the same on the wireless client and AP in order for communication to be established.
Page 11
This screen is where you set the basic wireless settings for the 300Mbps Wireless N USB Adapter SSID: Service Set Identifier, which is a unique name shared among all clients in a wireless network. The SSID must be identical for each client in the wireless network.
Page 12
The following will only be activated when Open, Shared Key or Auto is enabled: Network Key: choose the encryption way, either in HEX or ASCII formats, and enter the password in the blank space. Key Length: select 64 or 128 bits as the length of the keys Default Key: select one of the 4 keys to use.
III. Site Survey This screen allows the user to scan for available wireless networks (wireless clients and Access Points). It also allows the user to establish wireless communications with an available wireless network. Available Network – displays the wireless networks (wireless clients and access points) that are within range.
Page 14
Select any one of the wireless networks by double-clicking on it or clicking on the “Connect” button. Click the “Refresh” button to scan for available networks. IV. Profile This screen allows the user to scan manually add, edit and connect to existing profiles.
WiFi Protected Setup (WPS) is an optional certification program from the Wi-Fi Alliance that is designed to ease the task of setting up and configuring security on a wireless network. There are two methods used in the WPS as below instruction. - Push the button on my access point - To select the Push the button on my access point is for wireless client option.
V. About This screen displays information about the 300Mbps Wireless N USB Adapter, such as the Driver and Utility version. When a new version of the utility becomes available for upgrade, users will be able to identify by version numbers. Remove: Deletes the selected profile...
TECHNICAL SPECIFICATIONS Hardware Interface USB 2.0, 1.1 Standard Standards IEEE 802.11b, IEEE 802.11g and IEEE 802.11n (draft 2.0) Power Consumption Receive Mode: 167mA(max) ; Transmit Mode: 224mA(max) Supported OS Windows XP(32-bit) /Vista (32/64-bit) Dimensions (LxWxH) 80 x 27 x 12mm (3.1 x 1 x 0.5 inches) Weight 20g (0.7oz) Temperature...
Page 18
LIMITED WARRANTY TRENDnet warrants its products against defects in material and workmanship, under normal use and service, for the following lengths of time from the date of purchase. TEW‐624UB – 3 Years Warranty AC/DC Power Adapter, Cooling Fan, and Power Supply carry 1 year warranty. If a product does not operate as warranted during the applicable warranty period, TRENDnet shall reserve the right, at its expense, to repair or replace the defective product or part and deliver an equivalent product or part to the customer. The repair/replacement unit’s warranty continues from the original date of purchase. All products that are replaced ...
Page 19
AT TRENDNET’S OPTION. THIS DISCLAIMER OF LIABILITY FOR DAMAGES WILL NOT BE AFFECTED IF ANY REMEDY PROVIDED HEREIN SHALL FAIL OF ITS ESSENTIAL PURPOSE. Governing Law: This Limited Warranty shall be governed by the laws of the state of California. Some TRENDnet products include software code written by third party developers. These codes are subject to the GNU General Public License ("GPL") or GNU Lesser General Public License ("LGPL"). Go to http://www.trendnet.com/gpl or http://www.trendnet.com Download section and look for the desired TRENDnet product to access to the GPL Code or LGPL Code. These codes are distributed WITHOUT WARRANTY and are subject to the copyrights of the developers. TRENDnet does not provide technical support for these codes. Please go ...