Table of Contents
Advertisement
PREPARATION
Disconnecting the MM-RX400
player
You can disconnect the MM-RX400 player
from your computer whenever you like
except during the process of transferring
music files or formatting the memory
media.
When you disconnect the USB cable from
the MM-RX400 player, it will automatically
shut off, leaving the message "GOOD-
BYE!!"
16
ENGLISH
Installing the USB driver
Installation of the USB driver is
automatically performed when you turn
on the MM-RX400 player for the first time
after connecting it to the computer (page
15).
If any problem occurs during installation
of the Audio Manager software, the "Add
New Hardware Wizard" appears when
you connect the MM-RX400 player and
turn it on. If this happens, install the USB
driver by following the steps below.
1
Click on "Next" in the "Add New
Hardware Wizard" window.
2
Select "Display a list of all the
drivers in a specific location, so
you can select the driver you
want," then click on "Next."
3
Select "Universal Serial Bus
controllers" from the list, then
click on "Next."
4
Click on the "Have Disk" button.
The "Install From Disk" dialog box
appears.
Advertisement
Table of Contents
