Changing the Default Settings
You can change the default settings for sending a call, activating a Skype
call, switching
™
between a Skype
call and a regular call (call waiting) and conference calling, by running
™
the DPH-50U configuration.
Right-click on the DPH-50U icon and select Configure as shown below.
The Initiate VoIP Call – press these keys to get a VoIP dial-tone (only if you are in
PSTN mode). You can now dial a SkypeOut
call or a Skype
speed dial call from your
™
™
telephone handset.
The Send Key – press this key following the phone number (or speed dial number) when
making a VoIP call.
The Call Waiting Sequence – press these keys during a call to switch between a VoIP
and regular call. For example to switch from a regular telephone call to an incoming
Skype
call or to switch from a Skype
call to an incoming regular phone call.
™
™
The Conference Key Sequence – while on a Skype
call and you receive a regular call
™
or while on a regular call and you receive a Skype
call, press these keys conference
™
together the two calls.
Click the Restore Defaults button if you want to restore all sequences to their factory
shipped settings.
D-Link DPH-50U User Manual
25