Table of Contents
Advertisement
Using Web-Based Management
Configure Device IP Address
BOOTP: When BOOTP is selected, the VoIP will attempt to obtain its
IP settings from a BOOTP server located on your LAN.
DHCP: When DHCP is selected, the VoIP will attempt to obtain its IP
settings from a DCHP server located on your LAN.
IP Address: Enter an IP address for the VoIP gateway.
Subnet Mask: Enter a subnet mask for the VoIP gateway.
Default Gateway: Enter the IP address of the WAN device (usually a
router) you are using to make the WAN connection.
Click on the Save button at the bottom right of the window to save the settings.
Configure Gatekeeper
The items on this window are described below:
Mode: Choose the Gatekeeper mode.(Default is Auto)
Gatekeeper IP Address: This IP address is necessary if you chose
the Manual mode defined as above.
Configure Gatekeep window
32
Advertisement
Table of Contents
