Table of Contents
Advertisement
Figure 91: MAC Based Settings Page
4.
Modify the ACL Name, New Priority, Protocol, Source MAC Address, Destination MAC Address, Wildcard
Masks, VLAN ID, CoS, CoS Mask, and Action fields.
5.
Click
. The MAC based protocol is defined, and the device is updated.
–
Binding Device Security ACLs
When an ACL is bound to an interface, all the ACE rules that have been defined are applied to the selected inter-
face.Whenever an ACL is assigned on a port, LAG or, VLAN, flows from that ingress interface that do not match
the ACL are matched to the default rule, which is Drop unmatched packets. To bind ACLs to interfaces:
Click
1.
Security > Network Security > Access Control > ACL Binding. The ACL Binding Page opens:
Page 149
Configuring Device Security
Configuring Network Security
Hide quick links:
Advertisement
Table of Contents
