Battery Use - Motorola V600 Manual

V600UG.book Page 18 Thursday, October 16, 2003 1:23 PM
below. Some batteries perform best after several full charge/
discharge cycles.
Action
1 Plug the travel
charger into your
phone with the
release tab facing
up.
2 Plug the other end of the travel charger into the
appropriate electrical outlet.
3 When your phone indicates that the battery is fully
charged (
remove the travel charger.
Tip: You can safely leave the travel charger connected to the
phone for an extended period of time after charging is complete.
This will not damage the battery.

Battery Use

Battery performance depends on many factors, including your
wireless carrier's network configuration; signal strength; the
temperature at which you operate your phone; the features and/or
settings you select and use; items attached to the phone's
accessory connector port; and your voice, data, and other
application usage patterns.
Caution: To prevent injuries or burns, do not allow metal objects to
contact or short-circuit the battery terminals.
To maximise your battery's performance:
18 - Getting Started
Release tab
), press the release tab and