Motorola T280 Manual page 155

User.Guide.GSM.book Page 155 Tuesday, February 5, 2002 6:17 PM
Data and Fax Calls
&Q 6JKU
1 Plug the end of the
cable with the
Motorola logo into
the phone's
accessory connector
port. Make sure that
the logo and the
phone are both
facing you.
2 Plug the other end - the USB connection - into the USB
port on the external device.
Establish an Infrared Connection
Use the following procedure to connect your phone to an
external device using an infrared data link. You cannot use this
feature when a serial cable or USB cable is attached to your
phone. This phone is classified as a Class 1 LED product and is
considered safe under reasonable use.
Important: In order to create and maintain an infrared
connection, your phone must be within 30 centimetres of the
other device. Nothing can block the line of sight between the
two devices.
Find the Feature
M
> >
>
155