Table of Contents
Advertisement
Placing and Receiving Calls
To turn the phone on, press and hold Á until the display
appears and you hear an audible alert.
Press and hold Á again to turn the phone off. Powering off
will be displayed, and you will hear an audible alert.
What You Will See
When you turn on your phone, it performs a self-test to let you
know it is operational. When the test is completed, the display
shows:
• one of several possible greetings, such as:
- the name of your Service Provider
or
- an indication of local or non-local coverage area
• your phone number
• the Digital or Analog icon
Placing a Call
To place a call:
1 Turn the phone on.
2 Enter the number you want to call.
If you make a mistake, press C to erase one digit at a time.
Press and hold C to clear the entire entry.
You can also recall a previously dialed or stored number. (See
"Using Phone Memory" on page 21 for details on storing or
recalling.)
Using Your Phone
3 Press and hold A until you hear a second tone.
or
Press ¾ to place the call.
You will hear a single-tone alert (if the keypad tones are
turned on) and see Dialing XXXXXXX.
4 You can dial phone numbers with up to 32 digits, but only the
last 20 digits appear in the display.
Press ä to see the entire phone number.
Ending a Call
To end a call: Press ¼.
or
1 Press and hold A until you hear a second tone.
You will see Press § To End Call.
2 Press A again to end the call.
Receiving a Call
Your phone must be powered on to receive calls.
Press ¾.
Unanswered Call Indicator
When you cannot take a call, your phone keeps a count of your
unanswered calls and alerts you with the message Missed XX
Calls, where XX is the number of missed calls.
Press A to view missed calls.
Using Your Phone
19
English
Advertisement
Table of Contents
