Language (4-5); Time Alert (4-6); Restore (4-7); Display (4-8) - Motorola T205 User Manual

Language (4-5)

You can choose the language used to display the information.
After you press key to enter this item, press
and press key to confirm.

Time Alert (4-6)

Your phone will beep once a minute when you make a call after you initiate this
function.
Press key to enter this function and use
press key to confirm.

Restore (4-7)

Reset all settings to default setting.
After you enter this function by pressing
the phone code (The default setting for the phone code is 1234). Enter the
phone code and press key. Press

Display (4-8)

With this function, you can choose to display two different kinds of animations
on the LCD screen.
Choosing animation mode can reduce the phone's standby time by up to 10%.
After you press key to enter this item, press
modes:

On (4-8-1)

Press key to select this mode. The LCD screen will display phone and
network information by default.

Animation 1 (4-8-2)

Press key to select this mode. If no incoming call is received and you
leave the keypad untouched for about 20-30 seconds under standby
status, Animation 1 will be displayed on the LCD screen. The display will
be switched to the default mode if there is an incoming call received by
the phone or when you touch any key on the keypad.
key to select the language
key to select "On" or "Off", then
key, you will be prompted to enter
key again to confirm.
key to scroll the display
39