When the power is turned on
"Card locked!" message appears.
The SD memory card's or
SDHC memory card's write
protect tab is set to "Write
protect".
The Date/Time menu appears.
The built-in rechargeable
lithium battery charge is
low.
LCD monitor
Nothing is displayed.
[Power Saving] is set to
[Display Off].
The LCD monitor will shut off during shooting.
If [Power Saving] is set to [Display Off], the power saving function
will shut down the LCD monitor while shooting in
Camera screen is black at start-up.
Incompatible image has
been selected as the start-
up image in the My Camera
settings.
When recording to, erasing from or
formatting the memory card, slide the
write protect tab upward
Recharge the built-in battery
immediately
(p.
13).
Press any button other than the
ON/OFF button or change the
camera orientation to turn the LCD
monitor back on
Change the start-up image in the My
Camera settings
supplied software program.
(p.
200).
(p.
165).
mode.
(p. 177)
or use the
181