Adjusting Raw Images - Canon Optura Pi Instruction Manual

6 Check the save range and then click [Save].
The [Save As] dialog box appears.
7
Specify the save destination and then click the
[Save] button.
The merged images are saved.
8
Select the [PhotoStitch] menu
PhotoStitch quits.
See also the Help that are displayed when you click [
right of the window for information on operating PhotoStitch and
PhotoStitch functions.
Save range
Drag [ ] to change the range
[Quit PhotoStitch].
] on the

Adjusting RAW Images

You can make the same adjustments (reset processing conditions) to
RAW images as the functions that are available on the camera, such as
brightness and white balance adjustment. You can also convert edited
RAW images to JPEG or TIFF images and save them.
Because only the image processing conditions are changed when a
RAW image is adjusted, the original image data remains totally
unaffected. For this reason, image deterioration that usually
accompanies editing does not occur and you can readjust, redo or undo
changes knowing that you can always revert to the original shot
condition of the image.
1 Select a RAW image.
2
Select the [File] menu
RAW Image Task starts up and the main window appears.
3 Adjust the image.
RAW Image Task main window
The image is adjusted.
For the adjustment items in the RAW Image Task main window,
refer to p.70.
Adjustment items displayed in [Image Quality Adjustment] vary
depending on the camera model used for shooting the RAW
image.
[Processing RAW Images].
Introduction
Table of
Contents
1
Basic
Operation
2
Advanced
Operation
3
High-Level
Functions
4
Preferences
Reference
Contents
Lookup
Index
51