External Analog Component - Samsung HT-EM53C User Manual

Connecting to External Devices
To select the correct mode for an external device, press the FUNCTION button. Each time you press the button,
the mode changes in this order : BD/DVD
Red
R
White
W
SPEAKERS OUT
External Devices
Method 1 OPTICAL : Connecting an External Digital Audio Component
To connect the digital audio output of digital signal components such as Cable Boxes and Satellite
Receivers (Set-Top-Boxes).
Using a digital optical cable (not supplied), connect the Optical Digital Audio In jack on the product to the
Digital Optical Out jack of the external digital device using a digital optical cable.
 Select the D. IN mode.
Method 2 AUX IN : Connecting an External Analog Component
Using an RCA audio cable (not supplied), connect the AUDIO In jack on the product to the AUDIO Out
jack on the external analog component.  Select the AUX mode.
• Be sure to match the colors on the cable plugs to the colors on the input and output jacks.
| NOTE |
\ To see video from your Cable Box/Satellite receiver, you must connect its video output directly to your TV.
\ This system supports Digital sampling frequencies of 32 kHz or higher from external digital components.
\ This system supports only DTS and Dolby Digital audio. MPEG audio, a bitstream format, is not supported.
HT-EM53C_ZA_0316.indd 21 HT-EM53C_ZA_0316.indd 21
D. IN
AUX VIDEO
IN OUT
SURROUND
SURROUND OPTICAL
LAN WIRELESS HDMI OUT DIGITAL FM ANT
AUDIO IN
(Cable not supplied.)
AUX R. IPOD FM
AUX VIDEO
IN OUT
OPTICAL
DIGITAL
AUDIO IN
Method 1
AUDIO OUT
OPTICAL OUT
FM ANT
Method 2
(Cable not supplied.)
21
|
English
2012-03-16 오후 6:00:00 2012-03-16 오후 6:00:00