Lock/Unlock Keypad; Lock/Unlock Phone - Motorola MOTOSLVR L7C Motomanual

contain four digits, and the security code
must contain six digits.
To change a code or password:
Find it: s > w Settings > Security
> New Passwords
Select the type of code you wish to change,
enter the old code when prompted, then
enter the new code.

lock/unlock keypad

You can lock your phone's keypad to prevent
accidental key presses.
Press B * to lock/unlock the keypad.
50 basics

lock/unlock phone

You can lock your phone manually or set the
phone to lock automatically whenever you
turn it off.
To use a locked phone, you must enter the
unlock code. A locked phone still rings or
vibrates for incoming calls or messages, but
you must unlock it to answer.
You can make emergency calls on your phone
even when it is locked (see page 58).
To lock your phone:
Find it: s > w Settings > Security > Phone Lock
> Lock Now or Automatic Lock
Both Phone Lock options require you to enter the
unlock code before completing your selection.
To unlock your phone:
At the Enter Unlock Code prompt, enter your unlock
code and press Ok to unlock your phone.