Table of Contents
Advertisement
DVD-VIDEO PLA
DVD-VIDEO PLA
Owner's Manual
Owner's Manual
Owner's Manual
Owner's Manual
Owner's Manual
Owner's Manual
Owner's Manual
Owner's Manual
Owner's Manual
Owner's Manual
Owner's Manual
Owner's Manual
SD-9500P/SD-9800P/SD-3500P
SD-9500P/SD-9800P/SD-3500P
YER
YER
- Region code of DVD/Video player for UK is
region "2" or ALL. Inserting a disc with another
region code, it will not operate. Please only use a
disc with region code 2 or ALL.
-
is a 'DO NOT' mark. If this mark is displayed in
operating the product, please wait for a while, then
use it. If "
DO NOT" mark continues to be
displayed in pressing a button after that, it means
the button does not function in the currently
played disc.
- Press a product button on the REMOTE then use
the product.
• DVD operation : [DVD] button
• Video operation : [VCR] button
HELP LINE ; 0 870 100 2525
Advertisement
Table of Contents
Related Manuals for Daewoo SD-3500P
Summary of Contents for Daewoo SD-3500P
- Page 1 Owner’s Manual Owner’s Manual Owner’s Manual Owner’s Manual Owner’s Manual SD-9500P/SD-9800P/SD-3500P SD-9500P/SD-9800P/SD-3500P - Region code of DVD/Video player for UK is region “2” or ALL. Inserting a disc with another region code, it will not operate. Please only use a disc with region code 2 or ALL.
-
Page 2: Table Of Contents
Contents Product Information Important Safeguards ... 2 Advantages of This Product Are ..5 Read Carefully before Using ... 6 Identification of Controls ... 7 Remote Control ... 11 Connections Setting up your player... 12 Connecting your player through extra equipment (satellite system) ... -
Page 3: Important Safeguards
Important Safeguards CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. - Page 4 This set has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard. The safeguards incorporated in this unit will protect you if you observe the following procedures for installation, use and servicing. This unit is fully transistorised and does not contain any parts that can be repaired by the user.
- Page 5 Important Safeguards 12 LIGHTNING For added protection for this unit during a lightning storm, or when the unit is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the unit due to lightning and power line surges.
-
Page 6: Advantages Of This Product Are
Advantages of This Product Are ... • DVD, VCD, CD, CD-R(MP3), CD-RW, VHS • Watching DVD and recording broadcasts • Integrated remote control (VCR, DVD) • VISS function • Multiplex sound playback/record (SD-9500P&SD-9800P only) • High Sound Quality of 6 head Hi-Fi (SD-9500P&SD-9800P only) •... -
Page 7: Read Carefully Before Using
Read Carefully before Using Cautions in use of DVD-Video player are described below. Please read carefully before using a DVD-Video player. ✔ Installation place and handling • When you place this player near other devices, they may affect poorly together. •... -
Page 8: Identification Of Controls
Identification of Controls Main body (front panel) STANDBY/ON SD-9500P VIDEO AUDIO R EJECT - CHANNEL + & * SD-9800P & ! POWER (STANDBY/ON) button Use to power the device on/off if AC power supply is connected. @ Place to insert videotape # Disc tray $ VIDEO INPUT jack % AUDIO INPUT jack... - Page 9 Identification of Controls Operation Display Window VCR Operation REC and TIMER REC display Recording , TIMER Recording , To be Timer-recorded, To be Timer-recorded state ERROR (No Tape or Tape without tab) dts Disc Indicator Title This is displayed when playing a VCD and CD disc.
- Page 10 Main body (Rear Panel) ! POWER CORD Connect to outlet in a wall. @ EURO AV2/DECODER Jack # VIDEO OUTPUT Jack $ AUDIO OUTPUT Jack % DIGITAL OUTPUT (OPTICAL/COAXIAL) Jack To enjoy theatre sound quality in the home, connect this jack with amp or unit embedded with digital audio decoder.
- Page 11 Identification of Controls Accessories remote control 2 Batteries • To purchase accessories or not supplied additional parts, contact your nearest dealer or service centre. N.B.: Owner’s manual and warranty are not sold additionally. Instructions in using REMOTE • Operate remote control within 7m from the unit. •...
-
Page 12: Remote Control
Remote Control MENU TITLE/PBC DISPLAY OPEN/CLOSE INPUT PR + ENTER PR - & REPEAT SUBTITLE AUDIO PREV. NEXT PLAY/PAUSE PROGRAM SEARCH CLK/CNT ZOOM TV/VCR ANGLE/SPEED TRACKING SYSTEM Child Lock!!! Press the power [ ] button of the remote for about 5 seconds. -
Page 13: Setting Up Your Player
Setting up your player I Before you start, unplug all the equipment from the mains supply. (Option 1) - Connecting your player through RF lead Television 230V~, 50/60 Hz Back view of your player (Option 2) - Connecting your player through a scart lead Television 230V~, 50/60 Hz... -
Page 14: Connecting Your Player Through Extra Equipment (Satellite System)
Connecting your player through extra equipment (satellite system) I Before you start, unplug all the equipment from the mains supply. (Option 1) - Connecting your player through RF lead Television 230V~, 50/60 Hz Back view of your player Satellite You can also use this scarted connection if your player has two scart sockets. This will improve sound and picture quality when you are recording from a satellite. -
Page 15: Connecting Your Player To The Hi-Fi System
Connecting your player to the Hi-Fi system I Before you start, unplug all the equipment from the mains supply. Option 1 Television 230V~, 50/60 Hz Player You can also use a scart lead to improve picture and sound quality from your player. Option 2 Television 230V~,... -
Page 16: To Make Vcr Tape To Tape Recordings
To make VCR tape to tape recordings I Before you start, unplug all the equipment from the mains supply. How to connect 230V~, 50/60 Hz connect a scart lead from player to second 1) Insert the tape you wish to record on into the first player and press [INPUT] until “AV1” appears on the front display. -
Page 17: Connecting Dolby Digital Amp With Digital Audio Out Jack
Connecting Dolby Digital Amp with Digital Audio Out Jack How to connect REAR PANEL OF DVD-VIDEO Home Theater Receiver with Dolby Digital decoding capability Select either COAXIAL or OPTICAL to connect to a Dolby Digital Amplifier. ** If you want to know about “Dolby Digital”, please refer to [About DVD] in 49-50p. Manufactured under license from Dolby Laboratories. -
Page 18: 2Nd Scart Socket
Front AV If the VCR/DVD player has front input sockets, it is possible to connect devices such as a camcorder to the video. To watch a camcorder tape the video must be in AVF mode. -
Page 19: Initial Installation
Initial Installation I Switch the TV on. I You can also start "AUTO SET" in the SETUP "PR PRESET" I To tune in new stations (manual tuning) and enter station names see page 25-26. Setting up the player You should see this picture the first time you switch on the TV and player. -
Page 20: Setting Time And Date / Auto Clock
Setting time and date / Auto clock Setting time and date I Press [VCR] button on the remote control to change into VCR Mode and follow the procedure below. Call the player’s "SETUP", choose "VCR SETUP", then "CLOCK SET". Move to the position you want to change and type in the new values. -
Page 21: Osd On & Off / Output Select
OSD ON & OFF OSD (On Screen Display) ON & OFF This player is set to “OSD (On Screen Display) ON” mode before shipping and you can change it to OFF mode. Call the player’s "SETUP". Choose “VCR SETUP”. And press the [OK] button. Select “OSD ON/OFF”. -
Page 22: Dvd Playback
DVD Playback Press [ ] button to power on. Press [DVD] button of REMOTE to select DVD mode. Press [OPEN/CLOSE] button to open the disc tray. MENU TITLE/PBC DISPLAY Place a disc firmly on the disc tray, ensuring the disc’s label is uppermost. OPEN/CLOSE INPUT PR +... -
Page 23: Vcr Playback
VCR Playback Press [ ] button to power on. Press [VCR] button of remote control to change into VCR mode. Insert the desired tape. MENU TITLE/PBC DISPLAY OPEN/CLOSE INPUT PR + ENTER If you want to playback, press [PLAY/PAUSE] button. PR - When the operational status is flickering, adjust [TRACKING +/-] button. -
Page 24: Vcr Recording
Recording To Record With VCR Press [ ] button to power on. • Press [VCR] button of remote control to change into VCR mode. MENU TITLE/PBC DISPLAY OPEN/CLOSE INPUT PR + Insert a recordable tape. ENTER Insert a tape with recording tab. PR - REPEAT SUBTITLE... - Page 25 Recording To Copy From DVD To Videotape Insert the desired DVD disc. When the DVD disc is copyright protected, you can’t copy it. If DVD disc is not copy protected then insert a blank tape. Press [REC] button during playing of DVD. DVD plays and VCR starts recording.
-
Page 26: Tuning In New Stations
Tuning in New Stations I The TV and player are switched on. I To see the picture from your player, press the station button on the TV reserved for player input or the AV (Audio / Video) button. I "AV1/2" should not be selected with the AV button on the player. Tuning To complete the set-up of your video recorder when the auto set has not stored all of the channels or when you wish... - Page 27 Tuning in New Stations Station names I If your player is showing no station name or is showing a station name incorrectly, you can correct this. Call this menu (just see the previous page), if it isn't displayed. Select NAME position. Press the [0] button to change the given name.
-
Page 28: Timer Recording
Timer Recording I For timer recordings, clock, date, and stations must be set correctly. I Load a cassette with its safety tab in place and with sufficient free space for the recording. Timer recording using VideoPlus (SD-9500P&SD-9800P only) Call the VideoPlus menu by pressing PROGRAM on the remote control. - Page 29 Timer Recording I For timer recordings, clock, date, and stations must be set correctly. I Load a cassette with its safety tab in place and with sufficient free space for the recording. Normal timer recording Call the player’s "SETUP", choose "TIMER PROGRAM". Decide if you want to record "ONCE", "WEEKLY"...
- Page 30 Timer Review – changing and erasing Call the player’s "SETUP", choose "TIMER PROGRAM". Select the programming to change or erase. If you want to erase this programming press button [0], confirm by selecting OK button. If you wish to make changes: Move to the position you want to change using the [<...
-
Page 31: More Functions
More Functions I The counter counts in real time from the point you load the cassette. This does not have to be its beginning! The counter does not count unrecorded parts of the tape. I If you rewind beyond the zero position, the counter counts in negative values (e.g. – 0:01:15). Clock / counter display Each time you press [DISPLAY] button, Press 1x: Time and date+current status... -
Page 32: Auto Repeat
16 : 9 Wide Screen Format Playing back / Recording You can play and record the program of 16:9 Wide-Screen format with this player . • 16:9 Set -Auto : This video automatically detects the program format (16:9 or 4:3) and records or plays this program in the same format. - Page 33 More Functions I The player records the complete sound signal transmitted by the TV station. I On the mono VCR, you will hear the normal mono sound. The Hi-Fi system (SD-9500P&SD-9800P only) In addition to the normal mono sound track of VHS video recorders, your player is equipped with a high- quality Hi-Fi sound system.
-
Page 34: Connections And Copying
Connections and Copying I If you are using a SCART cable, select the AV input on the TV to see the picture from the player. I If you are not using a SCART cable, select the programme number on the TV reserved for video input to see the picture from the player. - Page 35 Connections and Copying I Switch off all components when connecting or disconnecting cables. Copying Other VCR Decoder for Pay-TV Camcorder Video Player Satellite Receiver Audio Amp. devices (other VCR) Assembling Should you wish to shoot your own film, from camcorder footage for example, use the assembly technique for smooth edit points: •...
-
Page 36: Playing A Desired Scene
Playing a desired scene To skip scenes in a disc To move to next chapter (or track), press [ The current chapter (or track) moves to the next chapter (or track). Press [ PREV] button. The current scene moves to the previous chapter (or track) or first scene of current chapter (or track). - Page 37 Playing desired scene Playing a programmed order While in STOP or Playback, press [PROGRAM] button. While the figure highlighted is appearing, please input the desired Title and Chapter number with NUMBER buttons. Press [ENTER] to memorize. To cancel, move Then input next number. the cursor to the desired parts and * In case of VCD and CD, please input TRACK...
-
Page 38: Repeating A Defined Period From A To B
Repeating a defined period from A to B I You may repeat a defined period from A to B. At the point where you want to start the repeat playback, press [A-B] button. A MP3 disc may The figure on the right appears and repeat playback not be repeated start position (A) is set. - Page 39 Playing a desired scene Searching VCD, CD and MP3 with a track or track time If you want to search with a track number, press [SEARCH] button one time. If PBC is OFF, the screen will be like the figure on the right.
-
Page 40: Confirming The Current Play Mode On Screen
Confirming the current PLAY mode on screen Confirming the current DVD disc mode While in PLAY mode, press the [DISPLAY] button. It shows the current disc mode. If you want to change the mode, select the item with up/down cursor and enter the new settings with [number], [<] or [>] button. - Page 41 Confirming the current PLAY mode on screen Confirming the current VCD, CD, MP3, JPEG disc mode While in PLAY mode, press the [DISPLAY] button. It shows the current disc mode. If you want to change the mode, select the item with up/down cursor and enter the new settings with [number], [<] or [>] button.
-
Page 42: Selecting An Audio Language, Subtitle Language And 3D Audio
Selecting an AUDIO language, SUBTITLE language and 3D AUDIO Selecting an audio language I The user may select an audio language and subtitle language if a disc includes Multi-language. Keep pressing [AUDIO] button till the user’s preferred language appears in A certain disc playback mode. -
Page 43: Selecting Zoom And Multi Angle
Selecting ZOOM and Multi Angle Using a zoom function I The user can enlarge the current screen about 2 or 4 times. Keep pressing the [ZOOM] button till the preferred zoom appears. • For the case of Every time the user presses the [ZOOM] button, the SVCD and VCD, zoom magnification changes 2 times (X2) only 2 times Zoom is... -
Page 44: About Mp3, Jpeg Discs
Playing a disc containing MP3, JPEG files This unit will play MP3, JPEG files recorded on CD-R and CD-RW discs. Turn on your television and select the channel assigned to this DVD player. Press the DVD open [OPEN/CLOSE] button, the disc tray opens. - Page 45 About MP3, JPEG discs Select the file to listen to (or view). Move the cursor to desired file which you want to listen to (or view) by pressing [ and press [ENTER] button to confirm. The selected file will be playback. * To disappear the directory screen, press [MENU] button in playback or stop mode.
-
Page 46: Displaying Menus In A Disc
Displaying menus in a disc To display menus in a disc I If a disc includes menus, the user may use them. Press the [MENU] button. • If playing a DVD disc, it shows menus in the disc. Also they are different according to discs. -
Page 47: Language Setup
Language Setup A user can set OSD language, Audio, Subtitle and Disc Menu. While in STOP or RESUME STOP mode, press the [SETUP] button. “OSD” means Selecting a OSD language. “On Screen Display”. Please select a language to be displayed on DVD screen. -
Page 48: Video Setup, Audio Setup
Video Setup I A user can set up a connected TV condition and screen. While in STOP or RESUME STOP mode, press the [SETUP] button. Selecting TV Aspect. Every time the user presses the [ENTER] button, TV ASPECT changes 4:3 LB WIDE 4:3 PS If a user selects “4:3 PS”, the user can watch only a centre of the original scene of... -
Page 49: Other Setups
Other Setups While in STOP or RESUME STOP mode, press the [SETUP] button. Select character display window. Select "On" to make OSD(On Screen Display) language display on screen. Select screensaver. If bright scenes continue to be displayed on the screen, the TV can be damaged. -
Page 50: About Dvd
About DVD Playable Disc • DVD, Video CD(Version 1.1, 2.0), S-VCD and Audio CD Disc type Playable Restriction Possible Region number 2 or Region number All Video CD Possible Version 1.0/1.1/2.0, SVCD/CVD Possible PCM or dts CD-G Possible Only Audio playback CD-ROM Possible MP3 File... -
Page 51: Cleaning Disc
About DVD CHAPTER It means the information recorded in a DVD. A title in a DVD is divided into many tracks, of which a track is called as a chapter. A certain scene of a recording can be quickly searched with the chapter number. -
Page 52: Basic Information About Vcr And Videotape
• If the picture is not clean yet, please repeat the above 2 or 3 times more. • A head-cleaner is not for sale from daewoo. Please obtain it from the nearest service agent. • In case a user ask the removal of contaminants of us, the user should pay extra charges. -
Page 53: Before Suspecting A Fault (Vcr)
Before suspecting a fault (VCR) Symptom ➤ • “Power On” does not work. Please check whether the power plug is inserted in an electric outlet. ➤ • It does not work even in “Power On”. Please check whether a videotape is inserted in. ➤... - Page 54 Symptom ➤ • Recording a TV program is For recording, you should use a videotape with a tab. ➤ impossible. Please check whether a channel is fixed on video. If not, you have to turn it into “TV” by pressing “INPUT” button. ➤...
-
Page 55: Before Suspecting A Fault (Dvd)
Before suspecting a fault (DVD) Symptom ➤ • The recorder does not play. If a DVD is from overseas, it may not be played. Please check a DVD’s region code whether it has the relative region code 2 or All. ➤... -
Page 56: Specifications
Specifications Power 230V~, 50/60Hz Consumed electricity Hi-Fi : 26W, Mono : 25W Weight 4.6kg Dimension (W x H x D) 435mmx93mmx255mm Operative temperature +5°C~40°C Installation condition Horizontal / Relative humidity under 80% Signal type PAL COLOR Antenna Input/output U/V-mixed: 75Ω unbalanced VIDEO input 1.0Vp-p (unbalanced, RCA JACK) AUDIO input...